background: removing heavy metals from industrial wastewaters by iron nanoparticles has been much noticed in the recent years. chromium is considered as one of the emphasis environmental pollutants. there are high concentrations of chromium in the wastewater of electroplating industries. magnetic iron nanoparticles are used to control and eliminate the heavy metals from industrial effluents thr...

Water is prime requirement for surviving of any living beings.  The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sour...

electroplating industry wastewater (eiw) characterized by high chemical oxygen demand (cod) is a big source of water and air contamination with heavy metals. the formation of cyanide complex with heavy metals is responsible for its elevated cod. the concentration of heavy metals in eiw can be removed by the use of different precipitating agents (sulfide and hydroxide). but the major bottleneck ...

background: chromium (cr) is the most important element used to plate other metals and electroplating factories are still consid­ered to be the most important industries which pollute the environment to this metal. this paper describes a study con­ducted to determine the efficiency of reverse-osmosis (ro) as a membrane technique for removal of cr from wastewater sam­ples synthetically prepared ...

background and aims: chromium is considered as one of the important environmental pollutants. there is high concentration of chromium in the wastewater of electroplating industries. magnetic iron nanoparticles are used to control and eliminate heavy metals from industrial effluents through the mechanisms of adsorption, ion exchange and electro-static forces. the aim of this study was to evaluat...

This paper addresses the issue of polishing electroplating wastewater in subsurface vertical flow constructed wetland. Electroplating wastewater treatment or polishing in constructed wetlands (CWs) was studied to a very limited degree. Four types of microcosm upflow constructed wetlands were selected for the experiment based on type of bed media and the presence or absence of vegetation (Phragm...

The metal fmishing industry uses over 40 production processes to produce a wide range of metal products. Waste streams generated include wastewater, waste oils, spent solvents, and spent process solutions. Current1,v a wide variety of techniques which minimize waste are available. Cost-effective methods to reduce electroplating wastewater contamination include water conserv&ion and drag-out red...

During the past several years, waste produced by the electroplating industry has attracted attention due to the level of pollutants found in the waste stream, the difficulty associated with treatment, and the cost of waste disposal. EPA has enacted regulations to control the discharge from plating facilities and estimates that 140 million lb of metal pollutants will be prevented from being disc...

Several electroplating industry including agricultural sector industries, sewage treatment and mining operations all combine to generate hazardous waste water containing enormous amounts of toxic heavy metals. The accumulation of toxic heavy metals in human beings and animals cause many metabolic disorders. Heavy metal concentration was estimated in sewage, sludge and electroplating wastewater ...