The residual porosity is an unavoidable phenomenon of the components produced by powder metallurgy process which in turn largely affects the strength property of the same. Now a day it is possible to control porosity of powder metallurgy components and retain them to desired amount when required. The porosity of a powder metallurgy component is greatly depends on the sintering temperature. In t...

The influence of SnO2 nanoparticles and method of their introduction in silver matrix on microstructure and physical properties such as density, porosity, hardness and electrical conductivity of Ag-SnO2 electrical contact materials were studied. The SnO2 nanoparticles were introduced by conventional powder mixing and by template method using different templates. All investigated samples were pr...

In this research work, Al 1wt% silver coated multi wall carbon nanotube (MWCNT) composite have been processed using powder metallurgy technique. In order to distribute CNT uniformly in the aluminum matrix high energy ball milling is required. . It was found that excessive milling can lead to carbide and alumina formation. So to reduce the milling time, the surface of CNT is modified by coating ...

The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...

The topic of the volume “Early Indian Metallurgy the production of Lead, Silver and Zinc through Three Millennia in North West India”, just published by Archetype Publications in London, discusses archeological data and analytic results, collected in several decades of research in three zinc, lead and silver mines in India. The author of the volume is Paul T Craddock, former Head of Metallurgy ...

In recent years, the rolling densification process has become increasingly widely used to strengthen powder metallurgy parts. The original composition of the rolled powder metallurgy blank has a significant effect on the rolling densification technology. The present work investigated the effects of different carbon contents (0 wt. %, 0.2 wt. %, 0.45 wt. %, and 0.8 wt. %) on the rolling densific...

In this paper an attempt has been made to correlate the usefulness of electrodes made through powder metallurgy (PM) in comparison with conventional copper electrode during electric discharge machining. Experimental results are presented on electric discharge machining of AISI D2 steel in kerosene with copper tungsten (30% Cu and 70% W) tool electrode made through powder metallurgy (PM) techniq...