0

The purpose of this study was to evaluate the dynamic viscoelastic properties of experimental silicone soft lining materials, Silastic MDX 4-4210 reinforced with silica fillers. Storage modulus (E'), loss modulus (E") and damping factor (tan delta) were determined using a dynamic mechanical analyzer under a deformation strain level of 0.27% at test frequency and a temperature range of 1 Hz and ...

Soft, solvent-free poly(dimethylsiloxane) elastomers are fabricated by a one-step process via crosslinking bottlebrush polymers. The bottlebrush architecture prevents the formation of entanglements, resulting in elastomers with precisely controllable low moduli from 1 to 100 kPa, below the lower limit of traditional elastomers; moreover, the solvent-free nature enables their negligible adhesive...

The hydrophobic recovery of polydimethylsiloxane elastomers was studied after exposure to partial electrical discharge. Silicone elastomers that were thoroughly extracted of free oligomeric impurities as well as those deliberately contaminated with low molecular weight (LMW) silicone fluids were used for these studies. Contact angle and X-ray photoelectron spectroscopy revealed that the recover...

OBJECTIVES The use of silicone implants in cosmetic and reconstructive surgery has been implicated in the development of autoimmune connective tissue diseases. Previous investigation of the influence of short-term silicone implantation using an experimental model of rheumatoid arthritis revealed no adverse influence upon disease despite the generation of autoantibodies against silicone bound pr...

BACKGROUND Colour degradation is a major problem in maxillofacial silicone elastomers. Recent studies have focused on colour stability and the mechanical properties of the silicone elastomers. A colour match is also essential for the acceptance of the prosthesis by the patient. The aim of this study is to assess the colour degradation of the silicone elastomer after being moulded in different c...

Cable accessories for mediumand high voltage applications contain field grading and field zoning parts or layers. These parts often consist of electrically conductive silicone elastomers. The electrical conductivity is achieved by using selected and long-term tested carbon blacks. Conductive layers and parts are used to provide safety against exposure, inner shielding and an electrical contact ...

Medical-grade silicone elastomers were subjected to accelerated aging in saline to verify the hydrolytic stability of the elastomer. Tensile strength, elongation at break, and the elastomer stress measured at 100% or 200% elongation did not change significantly for peroxide-cured sheeting aged in 37 degrees C or 100 degrees C saline for 45 h. Under similar condition, hydrosilylation cured sheet...