The tensile creep behavior is extremely important in crack prediction and stress analysis of concrete. The main objective is investigating the effects of the silica fume on the tensile basic creep of early-aged concrete. The effect of silica fume on tensile creep was studied using lever-type tensile creep tester. Silica fume amount by weight of total cementing material was 0%, 5%, 10% and 15%. ...

plastic shrinkage is one of the most important parameter which must be considered in hot weather concreting. if plastic shrinkage is not prevented, cracking will be significant, especialy if silica fume is used in the mix. in this paper, the effect of silica fume in bleeding and evaporation was investigated in laboratory. the results showed that in restrained shrinkage, beside relative humidity...

The addition of sand to cement paste was found to degrade the vibration damping ability, as shown by decreases in both loss tangent and storage modulus under flexure. However, further addition of silica fume more than restored the vibration damping ability, due to the silica fume causing increases in both loss tangent and storage modulus. Silica fume increased the loss modulus of mortar by as m...

this paper deals with the interfacial effects of silica fume (sf) and styrene-butadiene polymer (sbr) on compressive strength of concrete. analyzing the compressive strength results of 32 concrete mixes performed over two water-binder ratios (0.35, 0.45), four percentages replacement of silica fume (0%, 5%, 7.5%, 10%) and four percentages of sbr (0%, 5%, 10%, 15%) were investigated. a mathemati...

Microsilica, or silica fume, is an amorphous type of silica mostly collected as byproduct of the silicon and ferrosilicon alloy production. In this work, low shrinkage alumina-mullite ceramic composites were prepared from mixtures of calcined alumina, silica fume and aluminum metal powder and sintered at 1550 o C for 2 hrs. The influence of silica fume and aluminum powder on the densification p...

The production of tailor made high strength and high performance concrete are made by incorporating silica fume into the normal concrete and it is a routine one in the present days. The mix proportioning is intricate and the design parameters are increased due to the incorporation of silica fume in conventional concrete. The aim of this paper is to look into the different mechanical properties ...

In the present study, effect of pozzolanic material (Metakaolin and Silica fume) is studied through compressive and Flexural strength in cement concrete. Metakaolin and silica fume area used as cement replacement materials at 5%, 10% and 15% by mass keeping water–cement ratio as 0.42 Compressive and Flexural strength were observed after 7 and 28 days of curing. Silica fume is a by products resu...

The aim of the work reported in this article was to investigate the effects of medium temperature and industrial by-products on the key hardened properties of high performance concrete. Four concrete mixes were prepared based on a water-to-binder ratio of 0.35. Two industrial by-products, silica fume and Class F fly ash, were used separately and together with normal portland cement to produce t...

Silica fume (SF) and Metakaolin are cementitious materials used as admixtures to produce high strength concrete and to reduce the permeability. Also, Silica fume is used to make durable concrete structures in combination with ordinary Portland cement. In places where insufficient or poor curing concrete structures like sea shores, underground structures which undergo severe loss of compressive ...

The incorporation of silica fume into the normal concrete is a routine one in the present days to produce the tailor made high strength and high performance concrete. The design parameters are increasing with the incorporation of silica fume in conventional concrete and the mix proportioning is becoming complex. The main objective of this paper has been made to investigate the different mechani...