Nowadays, SiC is one of the refractory materials which is used widespread because of its unique properties like structural stability in high temperatures. SiC nano whiskers are important in reinforcement of different kinds of composites like ceramic base materials, thanks to their outstanding mechanical, thermal, and chemical properties like low expansion coefficient, high thermal resistant, hi...

We have demonstrated a method of producing nanoplatelets or complex well-ordered nanostructures from silicon carbide (SiC) whiskers. Preferential etching of SiC whiskers in a mixture of hydrofluoric and nitric acids (3:1 ratio) at 100 degrees C results in the selective removal of cubic SiC and the formation of complex structures resembling a pagoda architecture. Possible mechanisms governing se...

This study describes the role of in situ nano SiC whiskers on the strength and density of alumina silicate–SiC-carbonrefractory compounds. The prepared specimens were composed of 65 wt. % chamotte as alumina silicatecompound, 15 wt. % SiC-containing material regenerates and 10 wt. % fine coke and 10 wt. % liquid resole asbinder. Different values of additives (such as silicon a...

Nano-coated particles and whiskers were used as reinforcing additives for ceramic tool materials to take advantage of synergistic toughening enhancement mechanisms. An Al2O3/TiC/CaF2@SiO2/SiCw material was fabricated by hot-pressing. Self-lubricating toughened nano CaF2@SiO2 coated SiC studied. When the addition content 10 vol% 20 vol%, with best comprehensive properties obtained. The results s...

The effects of p-Sic whisker addition on the microstructural evolution and fracture toughness (K,c) of hot-pressed SIC were investigated. Most of the whiskers added disappeared during the densification process by transformation into the a-phase. The remaining whiskers acted as nuclei for grain growth, resulting in the formation of large tabular grains around the whiskers. The tabular grains aro...

During the synthesis of SiC, Si3N 4 and sialon whiskers by carbothermal reduction of SiO 2, a localized formation of amorphous phases or Si2N20 powders was observed beneath these whiskers. Because these whiskers were formed by the vapour/solid mechanism, the controlling gas phase was of primary importance to obtain whiskers of tailored morphology and chemistry. To elucidate the effect of the ga...

Magnesium based metal matrix composites (MMCs) have been extensively studied as an attractive choice for automotive and aerospace applications due to their low density and superior specific properties including strength, stiffness and creep resistance. Xi et al [1] studied the Ti6Al-4V particulate (TAp) reinforced magnesium matrix composite which is fabricated by powder metallurgy route. The te...

This study investigates the effects of the addition of tungsten on the structure, phase composition, textural properties and activities of β-SiC-based catalysts in the aqueous phase hydrogenation of furfural. Carbothermal reduction of SiO₂ in the presence of WO₃ at 1550 °C in argon resulted in the formation of WxC-β-SiC nanocomposite powders with significant variations in particle morphology an...

in this study the synthesis of molybdenum oxide nano-whiskers with circular cross-section is performed. in some areas, it was observed that also some whiskers have open tips exhibiting their hollow structures. these whiskers have side dimensions ranging 2-5 μm with an average diameter in the nanometer rang. the structure suggested the vapor-liquid-solid growth mechanism (vls). scanning elect...