RF MEMS switches can be used to achieve reconfigurability of various RF systems and in particularly for miniaturized antenna structures. In case of micro machined antennas, which involve low voltage signals, RF MEMS switches with low actuation voltage are required for achieving reconfigurability. The capacitive shunt switch derives its switching property from the significant difference of its c...

 This paper analyses the mechanical behaviour of various suspensions of electrostatically actuated RF MEMS switches. A family of capacitive switches is described, with suspensions varying step by step from cantilevers to meander shaped double clamped beams. The result is a capacitive shunt switch with a designed actuation voltage of 4.5 V, and 20dB isolation and 0.04 dB insertion loss at a fre...

This paper reports on the design of a novel ultra low actuation voltage, low loss radio frequency micro-electro-mechanical system (RF MEMS) capacitive shunt switch. The concept of the switch relies on a mechanically unconstrained armature actuated over a coplanar waveguide using electrostatic forces. The minimum actuation voltage of the switch is <2V, with an isolation of 40dB and insertion los...

A coplanar waveguide (CPW) single-pole double-throw (SPDT) X-band RF MEMS switch that can be actuated between states by applying a single voltage is introduced. Since a signal can be transmitted to one of the output ports without biasing, this has the potential to reduce the complexity of the required biasing network. The switch consists of a series and a shunt capacitive MEMS switch separated ...

This article details about the design of a K-band RF-MEMS capacitive type shunt switch and some of its major applications. The electrostatic and electromagnetic analyses of the designed structure have been performed using MATLAB and commercially available EM solvers. FEM and MOM both tools have been used extensively for full-wave analysis. Two major applications (SPDT switch and reconfigurable ...

This paper presents a low-actuation-voltage micro-electromechanical system (MEMS) capacitive shunt switch which has a very large bandwidth (4 GHz to 24 GHz). In this work, the isolation of MEMS switch is improved by adding two short high impedance transmission lines at the beginning and end of a coplanar waveguide (CPW). Simulating the switch demonstrates that a return loss (S11) is less than -...

During the switching on/off of shunt capacitor banks in substations, vacuum circuit breakers (VCBs) are required to switch off or to switch on the capacitive current. Therefore, the VCBs have to be operated under a harsh condition to ensure the reliability of the equipment. This study presents a complete comparison study of ordinary and phase-controlled VCBs on switching 10 kV shunt capacitor b...