in this study, the effective factors on warpage in short fibre reinforced thermoplastic composites has been studied. first of all, the effective factors in manufacturing process were detected and then in order to decrease the number of experiments, the approach of design of experiments has been applied. by using micromechanics theory in composites and coefficients of thermal expansion models, a...

Oligomer Coupling Agents in Phosphate Based Glass Fibre/PLA Composites P Haque, AJ Parsons, I Ahmed, DJ Irvine, GS Walker, CD Rudd (Univ of Nottingham) Polylactic acid oligomers as coupling agents have showed potentially higher interfacial shear strength in phosphate based glass fibre/ PLA composites. To influence bonding on the glass fibre surface, the short chain PLA with different end groups...

Short randomly oriented banana and sisal hybrid fibre reinforced polyester composites, banana/polyester composites and sisal/polyester composites were fabricated at different fibre loading say, 0.20 to 0.50 Vf. Composites were prepared by varying the relative volume fraction of the two fibres at each fibre loading. When the fibre loading was increased; tensile, flexural and impact properties in...

Results of an investigation of the mechanical performance of injection moulded long glass-fibre reinforced polyamide 6,6 composites are presented. The glass-fibre content in these composites was varied over the range of 10-50% by weight using fibres with average diameters of 10, 14 and 17 μm. Impact testing was carried out at -40, 23 and 80°C on dry-as-moulded and boiling water conditioned samp...

Results of an investigation of the mechanical performance of injection moulded long glass fibre reinforced polyamide 6,6 composites are presented. The glass fibre content in these composites was varied over the range 10-50% by weight using fibres with average diameters of 10, 14, and 17 micrometres. Mechanical testing and analysis of the apparent interfacial shear strength was carried out at 23...

Natural fibres have emerged as the potential reinforcement material for composites and thus gain attraction by many researchers. This is mainly due to their applicable benefits as they offer low density, low cost, renewable, biodegradability and environmentally harmless and also comparable mechanical properties with synthetic fibre composites. The properties of hybrid composites highly depends ...

Aim of this work was to investigate the tensile, flexural and dielectric properties of composites made by reinforcing Sansevieria cylindrica as a new natural fibre into a rubber based polyester matrix. The fibres extracted by retting and manual processes were used to fabricate the composites. These composites were tested for the properties which mentioned above and compared with those of establ...

Textile structures are engineered and fabricated to meet worldwide structural applications. Nevertheless, research varying textile structure on natural fibre as composite reinforcement was found to be very limited. Most of the research is focusing on short fibre and random discontinuous orientation of the reinforcement structure. Realizing that natural fibre (NF) composite had been widely devel...

In this work, polyamide 11 (PA11) and stone ground wood fibres (SGW) were used, as an alternative to non-bio-based polymer matrices and reinforcements, to obtain short fibre reinforced composites. The impact of the reinforcement on the thermal degradation, thermal transitions and microstructure of PA11-based composites were studied. Natural fibres have lower degradation temperatures than PA11, ...

Natural fibers are widely used as reinforcing material in composites. Pine needles can be used as natural fibers which are abundantly found in the hilly areas of India. A study on tensile test of pine needles and the crack analysis of pine needles short fiber reinforced composites has been presented in this paper.ASTM D638-10 standard is followed for tensile testing and a number of specimen is ...