This paper introduces an optical measurement system for shock wave characteristics. The system works by mountinga metal plate attached to spring mounts against the shock wavefront. This set is sealed and can plot the shock wave pressure diagram by measuring plate's displacement, radiation and changing the reflection of light during shock wave conflict, and converting these optical data to volta...

Unsteady dynamic behavior of TTCP model with different wrap around fin sets were investigated in a trisonic wind tunne. The aerodynamic coefficient force measurement in this wind tunnel shows good agreement in comparison with that of the NASA Langley Research Center in static case. The model was sinusoidally oscillated at three different frequencies of 1, 3 and 8 Hz at M=2.0 and the effects of ...

This paper describes a study of the effectiveness of commercially available shock absorbing insoles when used in four different pairs of shoes during normal walking. The measurement method was based on the use of the Fourier Transform of the axial acceleration of the leg measured by an accelerometer mounted at the ankle. The magnitude of shock was measured by the "Shock Factor" which has been d...

master moulds are used to cast copper anode moulds. these iron moulds are made of grey or nodular cast irons. according to desirable properties of ductile irons, it was expected that ductile cast iron moulds could have performed their nominal life. but in service, these moulds have not performed their nominal life and they have experienced premature failures due to warping and cracking. also gr...

in this research, shock wave motion, shock/boundary layer interaction, and flow separation in a transonic flow over a naca0012 airfoil were investigated experimentally. thirteen kulite sensors were utilized for measurement of pressure fluctuations over the airfoil. experiments were performed for angles of attack between -4 to 4 degrees and flow mach numbers of m= 0.39 to 0.82. the kulite sensor...