results the results showed that the epoxy plates 6 and 2 mm thick had the highest and the lowest averages of shielding effectiveness at 4.48 db and 1.90 db, respectively. however, increasing the thickness was useful up to 4 mm. in addition, in a similar attenuation pattern, x-band frequency was divided into lower, middle, and upper sections. the lower section had the highest shielding effective...

in this paper, shielding effectiveness (se) of a perforated enclosure with imperfectly conducting walls is evaluated. to this end, first, an accurate numerical technique based on method of moments (mom) ispresented. in this method, lossy metallic walls of the enclosure are replaced by equivalent electric surfacecurrent sources. then, the impedance boundary condition on the imperfectly conductin...

The relationship between surface transfer impedance and stirred mode chamber shielding effectiveness proposed by Eicher and Boillot has been simplified. This simplified relationship was used to compare the measured stirred mode chamber shielding effectiveness of nine shielding artifacts with the shielding effectiveness of the same samples calculated from transfer impedance measurements made at ...

Uncontrolled exposure to X-band frequency leads to health damage. One of the principles of radiation protection is shielding. But, conventional shielding materials have disadvantages. Therefore, studies of novel materials, as an alternative to conventional shielding materials, are required to obtain new electromagnetic shielding material. Therefore, this study investigated the electromagnetic s...

In this paper, fabric density influence on the shielding effectiveness of electromagnetic shielding fabric is studied. A series of blended shielding fabrics are tested using a waveguide tube testing method to obtain the shielding effectiveness with different density. Experimental results show that the shielding effectiveness increases with the increase of fabric density, and there are two rapid...

The effect of material type, yarn count, pick density, type of mordant and layers of fabrics on the electromagnetic shielding properties of textile materials has been studied. The shielding effectiveness of the fabric is measured by estimating the insertion loss incurred to the signal when the sample is placed in the path of the signal at the frequency range 100 MHz-3 GHz inside the coaxial tra...

This paper demonstrates that the addition of chemical agents and carbon fibers to cement can greatly enhance the shielding effectiveness of the concrete. In addition to improving the shielding effectiveness, carbon fibers and chemical agents enhance the tensile and flexural strengths significant ly. As both carbon fibers and steel fibers are electrically conductive, both can be added to cement ...