This paper presents a new model, called the "shear-friction truss model," for slender reinforced concrete beams to derive a clear and simple design equation for their ultimate shear strength. In this model, a portion of the shear strength is provided by shear reinforcement as in the traditional truss model, and the remainder by the shear-friction mechanism. Friction resistance is derived consid...

Friction plays an important role in the behavior of flowing granular media. The effective friction coefficient is a description of shear strength in both slow and rapid flows of these materials. In this paper, we study the steady state effective friction coefficient μ in a granular material in two steps. First, we develop a new relationship between the steady state effective friction coefficien...

The shear textures that develop in friction stir welds are reviewed and discussed. In all the materials examined, including face centred cubic (fcc), body centred cubic (bcc) and hexagonal close-packed (hcp) materials, friction stir welding produces a predominant shear texture with the close-packed directions aligned with the shear direction (SD) and the close-packed plane normal perpendicular ...

in reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. in this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...

Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times, friction pressures, and forging pressures. The microstructures of the interface of welded samples were analyzed by optical and scanning electron microscopy (SEM). Micrographs demonstrated that excellent welding formed continuously along the interface, except for samples welded for 3 s. Chemical compos...

This work outlines the etiological factors for exercise-related foot blisters and the pertinent prevention strategies related to these causes. Blisters result from shear forces within the epidermis causing cell necrosis. The extent of skin shear is influenced by friction at the skin and other interfaces, various skin characteristics, bony movement, and the shear modulus of the foot ware. The nu...

The distribution of the wall shear stress on the bed and sidewalls of an open channel receiving lateral inflow was obtained from experimental measurements of the distribution of the velocity in the viscous sublayer using a laser doppler velocimeter. The experiments were conducted in a 0.4 m wide by 7.5 m long flume. Lateral inflow was provided into the channel from above via sets of nozzles pos...

-We describe slip-rate dependent friction laws based on the Coulomb failure criteria. Frictional rate dependence is attributed to a rate dependence of cohesion c and friction angle qS. We show that differences in the stress states developed during sliding result in different Coulomb friction taws for distributed shear within a thick gouge layer versus localized shear within a narrow shear band ...

A thermodynamic model describing the phase transition of first order between structure states of lubricant material in the boundary friction regime is proposed. It is shown that lubricant melts with temperature increase or at shear of rubbing surfaces if the elastic strain (stress) exceeds the critical value. The phase diagram with domains of dry and sliding friction is constructed. The depende...

Slow and dense granular flows often exhibit narrow shear bands, making them ill suited for a continuum description. However, smooth granular flows have been shown to occur in specific geometries such as linear shear in the absence of gravity, slow inclined plane flows and, recently, flows in split-bottom Couette geometries. The wide shear regions in these systems should be amenable to a continu...