Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...

A process model was developed to simulate elemental mercury sorption by activated carbon in three distinct beds, namely a confined, a semi-fluidized, and a fluidized bed. The model involved the coupling of a kinetic model based on the mechanisms of surface equilibrium and external mass transfer, and a material balance model based on the tank-in-series approach. For surface equilibrium, three di...

drying properties of high moisture potato slices with initial moisture content of about 4.06 (db) under thin layer fixed, semi fluidized and fluidized bed conditions were studied. drying air temperatures of 40, 50, 60 and 70°c were applied in experiments using a laboratory fluidized bed convective dryer. in order to predict the drying behavior of potato slices, seven thin layer drying models we...

Nanoparticles (NPs) are applied in a wide range of processes, and their use continues to increase. Fluidization is one of the best techniques available to disperse and process NPs. NPs cannot be fluidized individually; they fluidize as very porous agglomerates. The objective of this article is to review the developments in nanopowder fluidization. Often, it is needed to apply an assistance meth...

A new semi-theoretical thin-layer model of the fluidized bed drying of Echium amoenum Fisch. & C.A. Mey. petals has been developed. Experiments were conducted under different conditions: temperatures of 40, 50 and 60 °C, and air velocities of 0.5, 0.75 and 1.0 m/s, until the moisture content decreased to 0.04.-0.06 kg of water per kg of dry matter. Drying processes in the fluidized bed were com...

Three-Phase Fluidized Beds have found an important place in processing technology as Reactors. Gas-Liquid-Solid fluidization is considered in the present paper as operating bed of fluidized solid particles simultaneously with co-current upward flow of a continuous liquid phase and a gaseous phase dispersed in the form of bubbles. In the present study, the experimental work of the author on heat...

Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation an...

Using dark fermentation, hydrogen can be generated from renewable organics including waste materials. Key to successful application of anaerobic fermentation is to uncouple liquid and biomass retention times in reactor system. This paper reviews reactor configurations (fixed-bed, fluidized-bed, upflow anaerobic sludge blanket and continuous stirred tank reactors) and operating processes (batch,...

Introduction Understanding the jetting phenomena near the gas distributor plate in a fluidized bed is important to gassolids mixing, heat and mass transfer, and erosion on any bed internals, which can all affect the performance of the bed. Moreover, acoustic vibration in a fluidized bed can be used to enhance the fluidization quality of particulate matter. Visualizing the jetting structure usin...

several methods are used to decrease seed drying time and enhance the quality of dried seeds. influidization methods, good aeration occurs during the drying process. in this research, conditioned seedswith 20% d.b. moisture content were dried at 30°, 40°, 50° and 60°c using three bed conditions (fixed,minimum fluidized, fluidized). all experiments were done using a batch-type fluidized bed drye...