PURPOSE To measure the surface loss of dental restorative zirconia and the short-term bond strength between an indirect composite resin (ICR) and zirconia ceramic after various sandblasting processes. MATERIALS AND METHODS Three hundred zirconia bars were randomly divided into 25 groups according to the type of sandblasting performed with pressures of 0.1, 0.2, 0.4 and 0.6 MPa, sandblasting t...

The aim of this study was to evaluate the effects of sandblasting and different chemical bonding agents on shear bond strength of zirconia and conventional resin cement. In this study, 35 zirconia specimens were treated as follows: Group I: control; Group II: sandblasting; Group III: sandblasting + Monobond S; Group IV: sandblasting + Monobond Plus; Group V: sandblasting + Z-Prime Plus. The spe...

Silicosis is a fibrotic disease of the lungs caused by inhalation, retention, and pulmonary reaction to crystalline silica. Crystalline silica exposure is widespread, and silica sand is an inexpensive and versatile component of many manufacturing processes. Its use and the incidence of silicosis are increased in industrial operations by the mechanization and the use of sandblasting, drilling, p...

BACKGROUND Orthodontists are commonly faced with the decision of what to do with debonded or inaccurately positioned brackets. An economical option to this dilemma is to recycle the brackets. Many recycling methods have been proposed, but the optimal bond strength of these recycled brackets needs further evaluation. Objectives: To evaluate and compare the effect of three recycling methods: (i) ...

AIM Surface treatment is necessarily required for bonding of zirconia to the veneering porcelain and luting cements. Sandblasting is the most common and probably the most efficient surface treatment method. Sandblasting roughens the surface and may affect the flexural strength of zirconia. Different sandblasting protocols may yield variable results. This study sought to assess the effect of san...

Objectives: This study was conducted to evaluate the effect of grinding and sandblasting on the microstructure, biaxial flexural strength and reliability of two yttria stabilized tetragonal zirconia (Y-TZP) ceramics. Methods: Two Y-TZP powders were used to produce fine grained and coarse grained microstructures. Sixty discs from each material were randomly divided into six groups of ten. For ea...

PURPOSE The aim of the present study was to assess the influence of pre-treatments of zirconia by sandblasting and/or heat treatment on the flexural strength of zirconia and debonding/crack-initiation strength of porcelain-veneered zirconia ceramic. MATERIALS AND METHODS Zirconia ceramic specimens were divided into four groups according to treatment (grinding as controls, sandblasting, heat t...

BACKGROUND Sandblasting particles which remain on the surfaces of dental restorations are removed prior to cementation. It is probable that adhesive strength between luting material and sandblasting particle remnants might exceed that with restorative material. If that being the case, blasting particles adhere to sandblasted material surface could be instrumental to increasing adhesive strength...

OBJECTIVE The purpose of this study was to evaluate the effects of three different surface conditioning methods on the shear bond strength (SBS) of metal brackets bonded directly to gold alloy with chemically cured resin. METHODS Two hundred ten type III gold alloy specimens were randomly divided into six groups according to the combination of three different surface conditioning methods (alu...

The introduction of air abrasion (sandblasting) technology to orthodontics may allow reaching optimum bond strength between the metal bracket and resin-modified glass ionomer cement. This study examined the effects of sandblasting metal bracket bases on the in vitro tensile bond strength of a resin-modified glass ionomer cement. Two-hundred foil-mesh based brackets were divided into ten groups ...