abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

the neogene intrusion masses in the noudeh-enghelab area located to the north of sabzevar ophiolite have cut the late cretaceous ophiolitic rocks, sedimentary- volcanic and eocene volcanic rocks and have been covered by pliocene and quaternary deposits. the margin is of lava with basalt, phyric andesite-basalt and andesite and the central parts (dome shaped) composed of phyric andesite-trachyan...

Recently, scientists are concerned about nuclear waste landfill sites. Because salt pans, salt marsh and salt domes are non-porous environment, with no stubble thickness of salt and the plant communities, less humans and animals can be found around them, so it can be used as a nuclear waste landfill.  In this study, 24 environmental criteria are investigated with emphasis on hydrology, wat...

thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...