geometry of the chute blocks in stilling basins plays a significant role in size and type of these structures. one of the most influencing factors in the design of the blocks is the fluctuating pressure which may cause fatigue on the blocks. despite investigations conducted by many researchers, there is not enough information about the pressure fluctuation around chute blocks in compacted still...

abstractinduced total pressure by flow, including mean and fluctuating components, around a selected chute block in saf stilling basins downstream of an ogee spillway was studied. several pressure holes were selected on various faces of a selected chute block to get enough information regarding the total pressure field. this paper reports the results of an experimental work and measurement of m...

The water cushion depth of stilling basin with shallow-water cushion is a key factor that 13 affects the flow regime of hydraulic jump in the basin. However, the specific depth at which the 14 water cushion is considered as “shallow” has not be stated clearly for now, and only conceptual 15 description is provided. This paper attempts to specify the best water cushion depth based on the 16 flow...

This research paper investigates about the performance of stilling basin models with different geometry of intermediate sill having height equivalent to the diameter of pipe outlet. The experimental study was carried out for three Froude numbers namely 3.85, 2.85 and 1.85 for non-circular pipe outlet. Performance index (PI) has been used to evaluate the performance of stilling basin models test...

An experimental investigation on effect of end sill on the performance of stilling basin models for a non circular pipe outlet has been presented in this research paper. New physical models for non circular pipe outlet stilling basin have been developed in the laboratory. These newly models were tested in the laboratory for three Froude numbers namely Fr = 1.85, 2.85 and 3.85. The new models ar...

The hydraulic jump has been studied as an important method for energy dissipation downstream water structures. Several methods have been used to optimize the hydraulic jump length. One of the common methods was the use of end sill. Steps may be used to control the location of the hydraulic jump downstream of hydraulic structures. Extensive studies have been conducted to investigate the effect o...

The experimental study reported here is intended to evolve new designs of stilling basins for deep and narrow openings used as outlets. Several appurtenances such as grid, Impact wall, stepped wall, weir wall, sloping end sill and wedge shaped blocks are used to study their influence on the hydraulic performance of the stilling basins with an aim to propose efficient stilling basin models. All ...

Hydraulic Energy dissipators are devices to protect downstream areas of basin from erosion by reducing the velocity of flow up to an acceptable limit. The stilling basins are transition structures fabricated to dissipate excess energy confined by flow with high velocity at the outlet of conduit or tunnel so that the flow beyond the basin does not threaten the firmness of bed and banks of downst...

hydraulic jump on adverse stilling basin is an unstable phenomenon which causes some complexities in controlling of the   jump. this paper considers the stability of free hydraulic jump on adverse stilling basins from a theoretical point of view. a minimum value of upstream froude number is needed to produce the free hydraulic jump on adverse stilling basins which was presented by a theoretical...