in some special cases, rubber compounds with high amounts of unsaturated elastomer are recommended with organic sulfur donors instead of mineral sulfurs. in this condition, activated sulfur is produced in situ and curingprocess is facilitated without accelerators. organic sulfur donor compounds have low thermal stability and in the vulcanization temperature produce free and activated sulfurs. t...

since reusing waste tire as a cheap filler is considerably high, in this study, recycled rubber to replace nr/br is used up to 15 phr and the positive and negative aspects of the rubber powder and reclaimed rubber in the physical, dynamical and processing properties are evaluated. the results showed that in the presence of recycled rubber, the cure rate, crack growth resistance, tear strength a...

Silane coupling agent generally use as improve the properties of white filler use in rubber compound for better dispersion. Also silane coupling agent reacts with organic filler & polymer chain as crosslink. Here in this research study the crosslink density & swelling phenomena of silane participate in vulcanization process with Nitrile rubber compound. Also show the comparisons of carbon fille...

the blending of nr and br rubber blend with n330 carbon black is studied on curing behavior and the physico-mechanical properties of a sbr rubber based tire tread compound containing n234 carbon black. the effect of sulphur and accelerator contents on different properties of rubber compound is also tested with a wide range of curing agents. partial substitution of sbr with nr shows significant ...

the present work reports and discusses the results of a 3d simulation of the injection molding process of a rubber compound that includes the mold flling stage and  material curing, using the computer code is developed in “udf” part of the fluent 6.3 cae software. the data obtained from a rheometer (mdr 2000) is used to characterize the rubber material in order to fnd the cure model parameters ...

coeffcient of  friction  (cof)  for  rubber parts  is one of  the key parameters in their interaction with solid rough surfaces (micrometer to millimeter scales),  such  as  tire-road  interactions. cof  of  rubber  depends  on  viscoelastic properties of rubber, roughness characteristics of the counter-part surface, and process variables such as contact nominal pressure and sliding speed. due ...

Calcium carbonate is a cheap and readily available filler used in rubber industry. This material is not compatible with rubber matrix, so many researchers have tried to modify its surface with various materials in order to increase its hydrophobicity and improve compatibility with the rubber matrix. In this effort, surface modification of calcium carbonate was carried out by 1.5%, 3% and 4% ste...

Effect of different fillers on natural rubber compounds was investigated through curing, mechanical properties and morphology studies for improving mechanical performance of rubber articles. In this work, natural rubber blends with Silica as Single-filler compounds, and blends with Silica and Carbon black as Bi-filler compounds were considered. Then, natural rubber blends with Silica, Carbon bl...