phenolic resin is among the oldest thermoset resins that have found wide spread applications in several industries, largely due to its high thermal resistance. in this research, room temperature curing of phenolic resin and its reinforced silica composite has been investigated by p-toluene sulphonic acid as a catalyst. mechanical properties of the composites such as impact strength, flexural pr...

phenolic resins are synthetic low molecular weight thermoset resins which are polymerized and cured to higher molecular weights by condensation method. these resins have high weathering resistance, high oxidative thermal properties and good chemical resistance. phenolic resins can be cured thermally or by acid curing. the most common method of curing phenolic resin is by thermal curing that tak...

In the field of soft robotics, hydrogels possess material properties that allow them to function as both soft strain sensors and electrodes for dielectric elastomer actuators. However, there is still much that needs to be understood about the curing process of hydrogels and the resulting material characteristics before devices can be reliably manufactured. In this study, we investigated the eff...

Abstract-Predicting 28-day compressive strength of concrete is an important research task for many years. In this study, concrete specimens were cured in two phases, initially at room temperature for a maximum of 30 h and later at a higher temperature for accelerated curing for a maximum of 3 h. Using the early strength obtained after the two-phase curing and the curing parameters, regression e...

Nano-structured TiO(2) thin film has been successfully fabricated at room temperature. Using a quarter wavelength characterization method, we have measured the acoustic impedance of this porous film, which can be adjusted from 5.3 to 7.19 Mrayl by curing it at different temperatures. The uniform microstructure and easy fabrication at room temperature make this material an excellent candidate fo...

OBJECTIVE The aim of this study is to evaluate the effect of composite preheating and polymerization mode on degree of conversion (DC), microhardness (KHN), plasticization (P), and depth of polymerization (DP) of a bulk fill composite. METHODS Forty disc-shaped samples (n = 5) of a bulk fill composite were prepared (5 × 4 mm thick) and randomly divided into 4 groups according to light-curing ...

This paper investigates the effect of curing temperature on the hydration, microstructure, compressive strength, and transport of cement pastes modified with TiO₂ nanoparticles. These characteristics of cement pastes were studied using non-evaporable water content measurement, X-ray diffraction (XRD), compressive strength test, electrical resistivity and porosity measurements, and scanning elec...

OBJECTIVES The purpose of this study was to compare the flexural strength and modulus of two commercial resin composites, at room temperature and 40, 45 and 50 degrees C prior to light polymerization with standard and step-cure protocols. METHODS One nanohybrid (Grandio, VOCO, Cuxhaven, Germany), and microhybrid composite resin (Filtek Z250, 3M ESPE, St. Paul, MN, USA) were used. The material...