This paper describes the immediate settlement of uniformly loaded rough ring footings with any stiffness on an inhomogeneous finite layer overlying a rough rigid base, which is not yet covered in the literature. Numerical solutions for a wide range of geometric and material combinations are obtained by finite element method. The effects of dimensionless parameters related to footing internal op...

This paper presents the results of a series of small-scale model tests and numerical analyses conducted on circular and ring model footings located near geogrid reinforced sand slopes. Layers of geogrid were used as reinforcement. For numerical analyses Finite Element Method (FEM) was used. The effects of reinforcement depth, size, number of layers, and the horizontal distance between reinforce...

An experimental study of the effect of silt and influence of cell confinement on the bearing capacity of circular footings on silty sand was carried out. Laboratory experiments on clean sand and sand containing silt up to 25 % were performed. Cells with different heights and diameters were used to confine the silty sand. The effect of proportion of silt in sand, cell diameter, cell height and t...

Methods to improve bearing capacity of footing resting of collapsing soil can, in fact, take two approaches, improving soil strength properties and intrusion of reinforcing sorces into soil. The footing is modeled by a square steel plate 0.1 by 0.1 m. The footing is loaded as to have a stress of 40 kPa and settlement is receded in dry and in soaking conditions. Two depths of the geo-mesh reinfo...

Ring footings are widely used as a foundation for water tanks, television antennas, silos, chimneys, oil storage etc. This paper is conducted to study the ring footing model's experimental cyclic behavior and circular resting on sandy soil reinforced with geocell. A group of ninety-six test models has been tested investigate shallow footings' beneath loading various rates. Four shapes sand thre...

this paper describes a series of laboratory model tests on strip footings supported on unreinforced and geogrid-reinforced sand with an inside void. the footing is subjected to a combination of static and cyclic loading. the influence of various parameters including the embedment depth of the void, the number of reinforcement layers, and the amplitude of cyclic load were studied. the results sh...