the influence of increasing the sio2/k2o molar ratio on the electrochemical action of a waterbornepotassium silicate zinc-rich coating was investigated by means of electrochemical impedancespectroscopy (eis) and corrosion potential (ecorr) measurements. the eis results showed thatincreasing the sio2/k2o molar ratio in the range of 3.135 to 5 by the addition of nano-sio2 to theresins improved th...

Formation mechanism of silicon modified aluminide coating applied on a nickel base super alloy IN-738 LC by pack cementation process was the subject of investigation in this research. Study of the microstructure and compositions of the coating was carried out, using optical and scanning electron microscopes, EDS and X-ray diffraction (XRD) techniques. The results showed that due to low partial ...

The outermost nanometres of a poly(vinylidene difluoride) (PVdF) based coil coating have been investigated using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). A reference PVdF based coating formulation and three variations of this formulation were characterised by XPS. The addition of flow agent and/or acrylic co-polymers induced significa...

Tightly bonding of bioactive coating is the first crucial need for orthopaedic implants. This study describes a novel and convenient technique to prepare bioactive coating with high adhesion on orthopaedic substitutes made of polymeric matrix. Here, a chemical corrosion method has been adopted to fabricate a coating on the surface of injection-moulded polyamide66 (PA66) substrates by corrosive ...

A complex poly(vinylidene difluoride) (PVdF)/poly(methyl methacrylate) (PMMA) based coil coating formulation has been investigated using time-of-flight SIMS (ToFSIMS). Employing a Bi3 + analysis source and a Buckminsterfullerene (C60) sputter source, depth profiles were obtained through the polymeric materials in the outer few nanometres of the PVdF topcoat. These investigations demonstrate tha...

Various types of zinc-rich coatings are available for corrosion protection. The challenges associated with the proper specification and application of zinc-rich coatings are briefly discussed. The paper then focuses on data from various studies, which quantify the corrosion protection benefits of various types of zinc-rich coatings. ZINC RICH COATING TECHNOLOGIES Zinc-rich coatings are used by ...

To take advantage of the synergistic effects of Pt and Zr, a kind of Zr-doped, Pt-modified aluminide coating has been prepared by a hybrid process, first electroplating a Pt layer and then co-depositing Zr and Al elements by an above-the-pack process. The microstructure and isothermal oxidation behavior of the coating has been studied, using a Pt-modified aluminide coating as a reference. Resul...

A study of sulfur-rich sludge (71.6% pyrite) dissolution at alkaline conditions (pH ca.9) was investigated using non-stirred and stirred flow-through experiments at room temperature (26 ± 1.2oC) and O2 partial pressure of 0.20 atm. The dissolution rate of pyrite-rich sludge was calculated based on the S release (aqueous SO4) at the steady-state. Results show that: (1) in the nonstirred reactor ...