نتایج جستجو برای: pulsed electrodeposition
تعداد نتایج: 39579 فیلتر نتایج به سال:
coni nanowires were deposited by pulsed electrodeposition technique into porous alumina templates. the effect of off time between pulses (toff) and reductive/oxidative time (treduc/oxid) on the microstructure and magnetic properties of the coni nanowires were investigated. maximum coercivity and squareness were obtained for samples fabricated at treduc/oxid= 0.5 ms and toff =400 ms. the coerciv...
Arrays of thermoelectric bismuth telluride (Bi(2)Te(3)) nanowires were grown into porous anodic alumina (PAA) membranes prepared by a two-step anodization. Bi(2)Te(3) nanowire arrays were deposited by galvanostatic, potentiostatic and pulsed electrodeposition from aqueous solution at room temperature. Depending on the electrodeposition method and as a consequence of different growth mechanisms,...
cofecu nanowires were deposited by pulsed electrodeposition technique into the porous alumina templates by a two-step mild anodization technique, using the single-bath method. the electrodeposition was performed in a constant electrolyte while cu constant was controlled by electrodeposition current. the electrodeposition current was 3.5, 4.25, 5 and 6 ma. the effect of electrodeposition current...
Pulsed electrolysis of copper has been systematically investigated by electrodepositing copper from a copper sulfate bath. Pulse duty cycles of 5 to 80 percent, at frequencies from 10 to 100 Hz with current densities ranging from 2.5 to 7.5 A/dm2 were employed. The appearance of Hull Cell panels with both direct current and pulsed current was recorded. The influence of pulsed current on current...
Anodic aluminium oxide (AAO) templates for multi-walled carbon nanotube (MWCNT) growth were produced by anodization of aluminium followed by pulse-reverse electrodeposition of cobalt inside the AAO pores. Cobalt functioned as the catalyst for H2/C2H2 chemical vapour deposition (CVD) growth of fairly well graphitized MWCNTs initiating inside the majority of the AAO pores and quickly growing beyo...
CoFeCu nanowires were deposited by pulsed electrodeposition technique into the porous alumina templates by a two-step mild anodization technique, using the single-bath method. The electrodeposition was performed in a constant electrolyte while Cu constant was controlled by electrodeposition current. The electrodeposition current was 3.5, 4.25, 5 and 6 mA. The effect of electrodeposition current...
fe49co33ni18 nanowire arrays (175 nm in diameter and lengths ranging from 5 to 32μm) were fabricated into nanopores of hard-anodized aluminum oxide templates using pulsed ac electrodeposition technique. hysteresis loop measurements indicated that increasing the length decreases coercivity and squareness values (from 274 oe and 0.58 to200 oe and 0.105, respectively), indicating the increase in m...
[Fe (tFe) nm/Cu (tCu) nm]N multilayer films were prepared using pulsed-current electrodeposition method. The role of the pulsed-current deposition and Fe and Cu layer thicknesses on the magnetic properties was investigated. The microstructure of the multilayer films is dependent on the thicknesses of both the Fe and Cu layers. The saturation magnetization of the multilayers strongly correlated ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید