نتایج جستجو برای: powders solid state reaction

تعداد نتایج: 1387945  

Journal: :international journal of iron & steel society of iran 2008
m. paghandeh a. monshi r. emadi

a basic alumina-spinel low cement castable (lcc) composed of sintered bauxite, reactive alumina, calcined alumina, calcined magnesia, microsilica, and high alumina refractory cement was prepared (castable a) to which 5% sodium hexa-meta phosphate was later added (castable b) to prepare samples for heat treatment at 110ºc, 900ºc, and 1400ºc. bulk density (bd), apparent porosity (ap), and cold cr...

حسینی, سیدمحمد, خرمی, غلام‌حسین , شاه‌طهماسبی, ناصر, قاسمی‌فرد, مهدی, پاکیزه, اسماعیل, کمپانی, احمد,

  This paper describes the synthesis of Pb(Zr0.95Ti0.05)O3 powder by sol gel and solid state methods. PZT powders were fabricated by solid-state reaction process using metal oxides and in sol gel method salts and organic compounds were employed. The powders were calcined at 700 and 950 oC in sol gel and solid state methods, respectively. The synthesized powders were analyzed by FTIR and XRD. Th...

سلامتی, هادی , سهرابی, داود, طلایی, زهرا, عبدالحسینی, اسماعیل , محمدزاده, بتول, مرشدلو, تکتم , پاکزاد, امین, کاملی, پرویز ,

In this paper, Bi1.66Pb0.34Sr2Ca2Cu3O superconductor powders have been prepared via sol-gel and solid-state reaction methods. The structural and magnetic properties have been studied by the X-Ray diffraction (Fullprof analysis) and magnetic susceptibility measurements. The superconductivity and structural properties of the samples have been compared with the properties of a commercially availab...

حسینی, سیدمحمد, کمپانی, احمد, قربانی مقدم, طاهره , کفاش, سمیه ,

In this research, CaMnO3 powders have been synthesized by solid state reaction and sol-gel methods at calcination temperature of 800°C. Particle size and morphology of the calcined powders have been investigated using XRD and TEM techniques. TEM image showed that the average particle size of the samples, prepared by sol-gel method, is about 85 nm. The optical gap was measured using the absorpti...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه شیراز - دانشکده علوم 1390

this work is presented in five parts. in the first part preparation of the starting complex [pt(c^n)cl(dmso)], 1, in which c^n = n(1),c(2?)-chelated, deprotonated 2-phenylpyridine, and dmso = dimethylsulfoxide, and its reaction with 1 equiv of the biphosphine ligands bis(diphenylphosphino)amine, dppa, or bis(diphenylphosphino)methane, dppm, to give the complex [pt(c^n)cl(dppa)], 2, or [pt(c^n)c...

2003
E. J. Bosze J. McKittrick G. A. Hirata

The blue-emitting phosphor cerium activated yttrium silicate, (Y1 mCem)2SiO5, was prepared via a novel synthesis technique called combustion synthesis. Combustion synthesis involves a highly exothermic redox reaction between metal nitrates and an organic fuel to produce a solid powder. The combustion synthesis parameter, the fuel-to-oxidizer ratio, has a direct effect on the physical properties...

آزاد, نسرین, حسینی, سید محمد, قنبری شوهانی, بشرا, کمپانی, احمد,

In this research, NTC thermistors with composition of NiMn2-xCoxO4 (x = 0.4, 0.8, 1.2, 1.6) prepared by two methods: solid state reaction and sol-gel (gel-combustion). The average particle size was monitored and structure of the calcinated powders have been investigated using x-ray diffraction (XRD) and tunneling electron microscopy (TEM) techniques. The average particle size was estimated to b...

Journal: :IEICE Transactions 2011
Tadashi Ishigaki Kenji Toda Tatsuya Sakamoto Kazuyoshi Uematsu Mineo Sato

Well-crystallized Ba2SiO4:Eu powders were grown on a substrate by the vapor phase reaction between a mixed powder (barium carbonate and europium oxide) and SiO gas. The vaporization of SiO occurs at 1400–1600◦C from the SiO2 source (or SiO powder) in a reducing atmosphere. The formed SiO gas was transported by 95 vol% Ar 5 vol% H2 gas and reacted with the raw material powders. The emission inte...

2013
Ashutosh Sharma

The effect of different processing routes on the microstructure of nanocrystalline ceria powder has been investigated. The nanocrystalline ceria is produced by solid state high energy ball milling (HEBM) and liquid state solution combustion synthesis (SCS) method. The liquid state route consists of a high temperature combustion reaction to form ceria from an aqueous solution of cerium ammonium ...

Journal: :Journal of nanoscience and nanotechnology 2012
L Fan C Wang J Di M Chen J Zheng B Zhu

Composite and nanocomposite samarium doped ceria-carbonates powders were prepared by solid-state reaction, citric acid-nitrate combustion and modified nanocomposite approaches and used as electrolytes for low temperature solid oxide fuel cells. X-ray Diffraction, Scanning Electron Microscope, low-temperature Nitrogen Adsorption/desorption Experiments, Electrochemical Impedance Spectroscopy and ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید