one of the most commonly used techniques to reduce the corrosion rate of rebar in concrete is addition substances named corrosion inhibitors into the concrete. corrosion inhibitor is chemical compounds that were added to concrete to prevent corrosion of steel in concrete. sodium nitrate is a type of anodic inhibitors that this study investigatesthe effect of this inhibitor on the properties of ...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

asymmetric membranes are widely used in many industrial membrane separation processes. the major advantage of membrane filtration over the conventional process is its ability to remove a wider spectrum of particles without using any chemicals. hollow fiber configuration offer many advantages over flat-sheet or tubular membranes. the spinning process of hollow fiber may look simple, yet it is te...

in civil engineering concrete is a material combined of hydraulic cement, sand, gravel and water. gravel and sand compose 60 to 70 percent of concrete. these aggregates support compression force of concrete. cement paste acts as glue to stick grain together. in bushehr factories producing aggregates do not operate according to astm standards, so that fineness modulus (fm) of the produced sands ...

چکیده روش های متعددی برای برآورد رواناب حاصل از بارش در حوضه های آبریز وجود دارد. یکی از این روش ها استفاده از مدل های هیدرولوژیکی است. با استفاده از مدل های هیدرولوژیکی و شبیه سازی فرآیندهای هیدرولوژیکی می توان با صرف کمترین زمان و هزینه، رواناب و مولفه های دیگر چرخ? هیدرولوژیکی را برآورد کرد. از آنجا که در حوضه های آبریز اندازه گیری تمام کمیت های مورد نیاز برای تحلیل رواناب ممکن نیست، انتخاب...

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

during natural gas processing, water in natural gas may cause to hydrates formation in pipelines which may lead to serious damages to process equipments. given the problems raised by present of water in natural gas, glycol solvent uses to remove water.in contact of glycol with gas always an amount of btex and voc absorb along with water, which on glycol recovery process, these substances separa...