in this research, mesoporous silica was applied as the host of corrosion inhibitor (molybdate). the loaded mesoporous silica was dispersed in an epoxy matrix. the composite was then coated on the mild steel plate. results showed that the corrosion resistance of the scratched epoxy/mesoporous silica loaded by molybdate was better than the one without molybdate or neat epoxy. on the other hand, e...

175.210 Acrylate ester copolymer coating. 175.230 Hot-melt strippable food coatings. 175.250 Paraffin (synthetic). 175.260 Partial phosphoric acid esters of polyester resins. 175.270 Poly(vinyl fluoride) resins. 175.300 Resinous and polymeric coatings. 175.320 Resinous and polymeric coatings for polyolefin films. 175.350 Vinyl acetate/crotonic acid copolymer. 175.360 Vinylidene chloride copolym...

Four point bend tests were conducted on two previously characterized particulate filled thermoplastic and thermoset polymeric coatings, the acoustic emission (AE) method being utilized to monitor the damage progress during the tests. Different damage mechanisms operating in the polymeric coatings can be recognized by the different amplitude range of the AE signals emitted. AE can be used to ass...

Thermoset and thermoplastic polymeric materials are used as coatings on the bore of downhole tubulars such as water injectors in the oil industry. Previous work has indicated that such coatings can fail by impact damage and by abrasion from the wire used to lower inspection tools down the tubular. The wire is commonly called “slickline” and the type of wear is called “wireline wear”. However, t...

and distribution system, approximately 70 to 90 percent of the energy used is for pumping. With the rising cost of electricity, more municipalities are searching for technologies to improve operational efficiency. One method for improving the efficiency of pumps is to line the pumps with a polymeric coating system. Polymeric systems have been shown to provide increased flow at the desired press...

Abstract In order to improve the anticorrosion protection properties, polypyrrole thin films were deposited on silicon steel plates. The anticorrosive effect of polypriol coating was evaluated by electrochemical measurements in two different aqueous solutions potassium chloride and hydrochloric acid. Polypyrrole-coated plates immersed for one seven days, respectively. obtained results show that...

Surface topography of medical implants provides an important biophysical cue on guiding cellular functions at the cell-implant interface. However, few techniques are available to produce polymeric coatings with controlled microtopographies onto surgical implants, especially onto implant devices of small dimension and with complex structures such as drug-eluting stents. Therefore, the main objec...

Submitted for the MAR09 Meeting of The American Physical Society Impact of Nanofillers on the Durability of Polymeric Coatings and Composites LI-PIIN SUNG, STEPHANIE WATSON, AARON FORSTER, Materials and Construction Research Division, National Institute of Standards and Technology, SHENG LIN-GIBSON, Poymers Division, National Institute of Standards and Technology — Metal oxide nanoparticles hav...

Smart materials cover a wide and developing range in engineering & medical application. This paper presents the “Stimuli-sensitive/smart” polymeric systems which can overcome dramatic property changes responding to small changes in its surrounding environment. Here there is a corrosion resistant or protective smart polymeric coating and paints have been described. Additional smart-coating princ...

Inkjet–printing technology was used to apply biodegradable and biocompatible polymeric coatings of poly(D, L lactide) with the antiproliferative drugs simvastatin (SMV) and paclitaxel (PCX) on coronary metal stents. A piezoelectric dispenser applied coating patterns of very fine droplets (300 xL) and ink jetting was optimized to develop uniform, accurate and reproducible coatings of high yields...