Polymer modified concrete (PMC) consists of Portland cement concrete with a polymer modifier. Its advantages are proper bonding strength to substrate concrete, high tensile and flexural strength and low amount of shrinkage and permeability. Using PMC overlays can be considered as a method for preservation of damaged concrete structures due to their suitable performance and durability. In this r...

polymer application for the improvement and modification of the bitumen used in roads surfaces has expanded in recent decades. the roads engineers and constructors, therefore, have used the modified bitumen in asphalts helping in this way to increase roads and pavements service life and improving the durability of the roads and asphalts. the bitumen used in asphalt mixture constitutes only a lo...

In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

in production of tissue paper, the adhesion of a liquid adhesive creping aid, compound polymer, as creping aids on the yankee dryer surface was investigated. a compound polymer was prepared based on mixing ratio of poly (amideamine)-epichlorohydrin resin (pae) as an adhesive agent, polyvinyl alcohol (pva) as a modifier agent, and cationic fatty acid (cfa) and ethylene glycol (eg) as release age...

Relatively tough epoxy-blend polymers are now commercially available for use as adhesives and as the matrices for fibre composites. Nevertheless, another failure property which may be of equal, or even of greater, importance in some applications is the resistance of the epoxy polymer to cyclic-fatigue loading. However, the cyclic-fatigue behaviour of epoxy polymers has not been studied in great...

Polyurethane (PU) is the fifth most common polymer in the general consumer market, following Polypropylene (PP), Polyethylene (PE), Polyvinyl chloride (PVC), and Polystyrene (PS), and the most common polymer for thermosetting resins. In particular, polyurethane has excellent hardness and heat resistance, is a widely used material for electronic products and automotive parts, and can be used to ...

The segmental dynamics of rigid, intermediate, and mobile molecular components in carboxyl terminated polybutadiene (CTPB)/ organo−clay (C18−clay) systems was characterized by fully refocused H NMR FID. In addition, H DQ NMR experiments allowed semiquantitative monitoring of changes in segmental dynamics near the interface. Both methods suggest a critical concentration of 60 wt % CTPB, indicati...

Abstract To meet the need for oil-compatible friction modifier additives that can significantly reduce energy consumption in boundary-lubrication regime, a macromolecular design approach has been taken. The aim was to produce lubricious polymer film on sliding surfaces. A series of readily functionalizable block copolymers carrying an oleophilic poly(dodecyl methacrylate) and poly(pentafluoroph...

Past few decades, conducting and redox active polymers play a critical role in the development of transducers for biosensing. It has been evidenced by increasing numerous reports on conducting and redox active polymers incorporated electrodes for assay of biomolcules. This review highlights the potential uses of electrogenerated polymer modified electrodes and polymer/carbon nanotubes composite...