Résumé en anglais This paper presents some investigations on the properties of guanine (G) and cytosine (C) based heterostructures deposited on flexible substrates. The effects of two types of maleic anhydride–aniline derivatives (maleic anhydride-cyano aniline or maleic anhydride-2,4 dinitroaniline) buffer layer, deposited between indium tin oxide and (G) or (C) layer, on the optical and elect...

polyethylene imide was synthesized from the reaction of high density polyethylene grafted maleic anhydride (pe-g-ma) and 1,4-diaminobutane in boiling xylene. the chemical compositions of the reaction products were examined by fourier transform infrared spectroscopy. different conditions and parameters like the effect of temperature, time, monomer concentration and oxygen on the extent of reacti...

linear low density polyethylene (lldpe) was blended with esterified styrene-maleic anhydride (esma) and its physical and mechanical properties were studied. styrene-maleic anhydride (sma) copolymer was synthesized by precipitation reaction. then, sma was esterified by 1-decanol in methylethyl ketone solvent. from the ftir spectrum of esma it is evident that the corresponding peaks of anhydride ...

Banana fiber (BaF)-filled composites based on high density polyethylene (HDPE)/Nylon-6 blends were prepared via a two-step extrusion method. Maleic anhydride grafted styrene/ethylene-butylene/styrene triblock polymer (SEBS-g-MA) and maleic anhydride grafted polyethylene (PE-g-MA) were used to enhance impact performance and interfacial bonding between BaF and the resins. Mechanical, crystallizat...

Linear Low Density Polyethylene-Natural Rubber (LLDPE-NR) composites in the ratio of 70:20 were made with different loadings of nanosilica and micro-scale Palm Oil Fuel Ash (POFA). Linear Low Density Polyethylene grafted with maleic anhydride (LLDPE-g-MAH) of 10 wt% was added as a compatibiliser. The composites were produced by using two-roll mill machine. The tensile properties of the composit...

In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...

In this work, the influence of three types of styrene maleic anhydride (SMA) oligomers on the adhesion of polystyrene wood plastic composites (WPC) was investigated. The composites were processed on a twin-screw co-rotating extruder below 200°C using 20 wt% of wood flour. The styrene maleic anhydride with different content of maleic anhydride groups, 30%, 25% and 20% (w/w) and levels of 1, 2 an...

Jute fiber/polyethylene biocomposites were prepared using a hot press molding technique. The effects of maleic anhydride, clay, and silica on the physical, mechanical, and thermal properties of jute fiber-reinforced polyethylene (PE) biocomposites with different fiber loadings (5, 10, 15, and 20 wt.%) were investigated. The biocomposites were characterized by Fourier transform infrared spectros...

This study focuses on the development of low-density polyethylene matrix nanocomposite films for food packaging industry and aims at improving oxygen barrier properties while maintaining other relevant characteristics, such as processability, easy post-processing, optical mechanical properties. nanocomposites, with 1 2.5 wt.% nanoclay (NC) also compatibilized 5 grafted maleic anhydride (PE-g-MA...

Abstract Waste high-density polyethylene (w-HDPE)/ acrylonitrile–butadiene–styrene (ABS)/ground tire rubber (GTR) have been melt blended by two-roll milling. Ternary blends of w-HDPE/ABS/GTR observed to be incompatible in the composition range studied which revealed deteriorated mechanical properties. Two main types compatibilizers such as an experimental olefin-maleic anhydride copolymer based...