in this study, a simulation of tire–soil interaction model was considered with special view to two-dimensional (2-d) fem model of carcass. coefficients of mechanical behavior of silty-loam soil were accurately measured to obtain an effective simulation. the results of simulation which was implemented in matlab7, showed that the radial-ply tire had greater tractive efficiency than bias tire at t...

A finite element modeling of tire using Ansys is used to analyze the free vibration of radial pneumatic tires. The natural frequencies and mode shapes of pneumatic tires are investigated. The effects of some parameters such inflation pressure, tread pattern, ply-angles and thickness of belts on the natural frequency of tires are investigated. Keywords— natural frequency, inflation pressure, tre...

the natural frequencies and mode shapes of pneumatic tires are predicted using a geometrically accurate, three-dimensional finite element modeling. tire rubber materials and cord layers are represented independently using “shell element” available in cosmos. the effects of some physical parameters such as the inflation pressure tread pattern, thickness of belts and ply angles to the natural fre...

The natural frequencies and mode shapes of pneumatic tires are predicted using a geometrically accurate, three-dimensional finite element modeling. Tire rubber materials and cord layers are represented independently using “shell element” available in COSMOS. The effects of some physical parameters such as the inflation pressure tread pattern, thickness of belts and ply angles to the natural ...

wheel numeric and different versions of mobility numbers are important models for predicting the rolling resistance. in this study, data related to the rolling resistance of cross ply and radial ply tires were compared with the resultant values from several models. also, the preciseness of models in rolling resistance prediction was evaluated. for this purpose f test and 1-1 line method (p≥ 0.0...

Often when vehicles interact with roadside hardware like guardrails, bridge rails and curbs, the interaction between the roadside hardware and the tire causes the tire to lose its air seal and "blow-out". Once the seal between the rim and rubber tire is lost, the tire deflates. The behavior of the deflated tire is much different than the behavior of an inflated tire such that when this behavior...

Wheel numeric and different versions of mobility numbers are important models for predicting the rolling resistance. In this study, data related to the rolling resistance of cross ply and radial ply tires were compared with the resultant values from several models. Also, the preciseness of models in rolling resistance prediction was evaluated. For this purpose F test and 1-1 line method (p≥ 0.0...

This research presents the results of tests conducted under field conditions and included measuring footprint tires on soil. Two agricultural same size but different internal structures were tested, 500/50R17 (radial) 500/50-17 (bias-ply). The factors tire inflation pressure (0.8 bar, 1.6 2.4 bar) vertical load (7.8 kN, 11.8 15.7 kN). made soil was scanned with a 3D scanner, resulting in digita...

This paper presents the results of measurement tire footprints in soil. The research was conducted under laboratory conditions using soil-filled cases. objects were two tires: a radial and bias-ply same size. variable parameters vertical load (7.8 kN, 15.7 23.5 kN) inflation pressure (0.8 bar, 1.6 2.4 bar). Test benches with mounted tire, soil case, 3D scanner used research. Using test bench, l...