abstract wenner direct contact method is a method of estimating apparent electrical conductivity (eca) of agricultural soils in situ. this method can be affected by factors such as quality of electrodes in contact with soil, type of employed electric current, moisture content, clay content and compaction of soil. in this research, the effect of electrode type (rod and plate) and electric curren...

The present study aims at designing a promising Microbial Fuel Cell (MFC) to utilize wastewater in order to generate electricity. Two types of salt bridge have been used in MFC (KCl and NaCl). The maximum electricity generation with 1M KCl and NaCl has been 823 and 713 mV, respectively. Varied salt concentrations (0.5M, 1M, 2M, and 3M) of salt bridge in MFC have been analyzed with different fac...

The present study aims at designing a promising Microbial Fuel Cell (MFC) to utilize wastewater in order to generate electricity. Two types of salt bridge have been used in MFC (KCl and NaCl). The maximum electricity generation with 1M KCl and NaCl has been 823 and 713 mV, respectively. Varied salt concentrations (0.5M, 1M, 2M, and 3M) of salt bridge in MFC have been analyzed with different fac...

It is a denture type micro electric field loading device design. The device is a removable partial denture, and there are a power supply and the electrode plate in the denture. The electrode plate embedded in the denture base, electrode embedded in the buccal and lingual base, between the base and the artificial teeth is the power supply, the power supply and both sides electrodes connected by ...

this article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. the electrostatic actuation was induced by applying ac-dc voltage between the microbeam and electrode plate. in contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. in additio...

This study discusses the improvement of surface finish of medium or large holes beyond traditional drilling, boring, rough turning, or extruding by electrochemical smoothing using inserted rib-plate electrodes. High electrical current is not required when the rib plate is used to reduce the engaged area for large hole. Traditionally, the hole polishing requires a sequence of complicated premach...

For maintenance microrobots for small diameter pipes in power plants and so on, a novel microgripper using divided-electrode type flexible electro-rheological valves (DE-FERVs) was proposed and developed. Each bendable finger consisted of the DE-FERV and a hydraulic rubber actuator and was several millimeters long. The DE-FERV had an axially divided parallel plate electrode pairs in a flexible ...

We present a new tri-electrode topology for reducing the control voltage for electrostatic actuators. Conventional parallel plate actuators are dual-electrode systems, formed by the MEMS structure and the drive electrode. By placing a perforated intermediate electrode between these elements, a tri-electrode configuration is formed. This topology enables a low voltage on the intermediate electro...

This article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. The electrostatic actuation was induced by applying AC-DC voltage between the microbeam and electrode plate. In contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. In additio...

A health monitoring system (HMS) involving a blood extraction device with a new type of hybrid biosensor comprising an enzyme and a semiconductor has recently been developed. A MOSFET was used as the transducer. The gate electrode was extracted from the MOSFET using a cable. Gold (Au)-plate-immobilized glucose oxidase (Go) was used as a biosensor and attached to the gate electrode. Go was immob...