this paper presents the results of the assembly process of a gasketed bolted flanged pipe joint for two different bolt tightening strategies, i.e. asme and industrial using torque control of preload method.  the final clamping force is achieved in four and five passes in asme and industrial strategy respectively. axial bolt stress variation, at the end of each pass, individual bolt bending beha...

Hydrogen gas has been widely recognized as an environmentally clean and renewable energy fuel, and it provides a way to reduce greenhouse gas and air pollution emission. A great deal of effort has been made to develop new techniques in the field of hydrogen energy, including hydrogen production, storage, and infrastructure. Recently a metallic gasket, which is made of type 316L stainless steel,...

A tool was developed to aid in ruminal insertion of abomasal infusion lines into dairy cows. The tool consisted of 2 pieces cut from polyvinyl chloride pipe. The first piece of pipe, the insertion tool, contained a groove that held the flexible plastic flange that is on the end of the infusion line. The insertion tool containing the flange was inserted into the ruminal cannula, through the sulc...

Abstract—A large variety of pipe flange is required in marine and construction industry. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. This approach is very simple and widely used for a long time; however, it results in high development cost and low productivity, and the productions made by this approach usually have safety problem at the welding area....

Pipe joints have been widely utilized in industrial plants, where dynamic load of vibration is considerably harmful for sealing performance. However, there is a lock of design codes and experimental procedures developed for vibration testing of pipe joints. This paper proposes an experimental setup for testing of pipe joints, which use metal gaskets, in vibratory conditions. Also, a flexible pi...

Abstract Duplex stainless steel has been widely applied to industry. In this paper, nondestructive testing, chemical composition analysis, metallographic hardness test, and scanning electron microscope were used study the causes of crack in butt joint girth weld pipe flange. Both flange are duplex S31803. Through it was judged that a crystalline crack, generated welding process, which related p...

Numerical model of a corroded weld joint connecting pipe to flange using finite element method was developed, and coupled with usual stress models. The structure material has been characterized experimentally. Monte Carlo simulations, FORM SORM methods have applied for estimating reliability failure probability under corrosion residual effects. A numerical case various rates conducted determine...

According to the situation of multi hole machining with linear circular flange flange parts, a device is analyzed and designed, which can process multiple flange holes at the same time, and the design of the device including fixture design and multi spindle box design. the three dimensional modeling and analysis software is used, make a study on the design and manufacture of the flange hole of ...

The use of pipe flange connections is standardized in the codes of JIS, ASME, DIN and so on. However, these codes are almost entirely dependent on experience, and subsequently some problems concerning pipe flange connections have been encountered. In the present paper, the distribution of contact stresses which governs the sealing performance is analyzed as a three-body contact problem, using a...

welding produces residual stresses and distortion, having detrimental effect on structure integrity and service performance of the welded pipe joints. this paper investigates residual stresses and distortion during gas metal arc welding (gmaw) of pipes of schedule 40 and 60, nominal diameter 100mm and 200mm and thickness 8mm and 10mm with ansi flanges of class 300#. welding parameters including...