using piezoelectric patches the stress concentration around a hole on a plate under tension is reduced and controlled. to attain the reduction in stress two placements for piezoelectric patches is investigated. the first location is top/bottom of the hole with compression induced strain and the second is left/right of the hole with tension induced strains to control the stress flow. the result ...

This article has studied the effect of ratio of stiffness and thickness between piezoelectric actuators and host plat has been explored on optimal pattern for placement of piezoelectric work pieces around a hole in thin isotropic plate under static loading to reduce stress concentration. The piezoelectric actuators reduce directly or indirectly the stress concentration by applying positive and ...

The main objective of this study is to reduce optimal vibration suppression of Timoshenko beam under non-periodic step and impulse inputs. Cantilever beam was modeled by Timoshenko theory and finite element numerical method. Stiffness (K), mass (M), and damping (C) matrices are extracted. Then, in order to control structure vibration, piezoelectric patches were used due to simultaneous dual beh...

In this paper, the active buckling control of smart functionally graded (FG) plates using piezoelectric sensor/actuator patches is studied. A simply supported FG rectangular plate which is bonded with piezoelectric rectangular patches on the top and/or the bottom surface(s) as actuators/sensors is considered. When a constant electric charge is imposed, the governing differential equations of mo...

A plate periodically bonded with piezoelectric patches on its surfaces is considered. The differential quadrature element method is used to solve the wave motion equation for the two-dimensional periodic structure. The method is very simple and easy to implement. Based on the method, band structures for in-plane wave propagating in the periodic piezoelectric plate are studied, from which the fr...

In this paper, the first and second order approximations of Taylor expansion are used for calculating the change of each natural frequency by modifying an arbitrary parameter of a system with a known amount and based on this approximation, the inverse eigenvalue problem is transformed to a solvable algebraic equation. The finite element formulation, based on the classical laminated plate theory...

Wave propagation in composite structures with shunted piezoelectric patches is investigated in this work. The Wave Finite Element(WFE) approach is firstly developed as a prediction tool for wave propagation characteristics like dispersion curves in composite structures, and subsequently extended to consider shunted piezoelectric elements through the Diffusion Matrix Model(DMM). A three-layered ...

In this article, the issue of attitude control and active vibration suppression of a nonlinear flexible spacecraft is assessed through piezoelectric patches as actuator and sensors. Two controller loops are applied: the inner loop, to make the panel vibration damped through piezoelectric patches; and the outer loop, to perform spacecraft maneuver using the reaction wheel acting on the hub. An o...

The increasing development of smart materials, such as piezoelectric and shape memory alloys, has opened new opportunities for improving repair techniques. Particularly, active repairs, based on the converse piezoelectric effect, can increase the life of a structure by reducing the crack opening. A deep characterization of the electromechanical behavior of delaminated composite structures, acti...