Passive sampling is an approved and accurate method for the assessment of organic compound exposure over long sampling time. This method could be very convenient for the short-time exposure assessment, but passive samplers have to be validated for this use. In this article, the behaviour of two commercial passive samplers (GABIE and Perkin Elmer) under fluctuant concentration conditions is stud...

Controlled laboratory experiments were conducted to demonstrate the use of passive samplers for soil vapor concentration monitoring. Five different passive samplers were studied (Radiello, SKC Ultra, Waterloo Membrane Sampler, ATD tubes and 3M OVM 3500). Ten different volatile organic compounds were used of varying classes (chlorinated ethanes, ethanes, and methanes, aliphatics and aromatics) a...

The need for ambient gaseous ammonia (NH(3)) measurements has increased in the last decade as reactive NH(3) concentrations and deposition fluxes show little change even with tightening standards on nitrogen oxides (NO(x)) emissions. Currently, there are several networks developing methods for adding NH(3) measurements in the U.S. Gaseous NH(3) measurements will provide scientists and policymak...

Passive sampling devices have been used since the 1970s to measure time-weighted average (TWA) or equilibrium concentrations of pollutants in various environmental matrices (e.g. air, soils and sediments and water). In recent years the popularity of using such samplers has increased and the technology in now well established for the measurement of atmospheric pollutants. This sector has a long ...

The overall hypothesis of this research is that the use of passive samplers is an effective method to measure spatial and seasonal trends of atmospheric PCBs in an urban environment. In support of this, I extracted, analyzed and quantified congener specific concentrations from over 200 passive samples and over 200 active sampler, or Hi-Vols. I studied best practices for the use of methods to de...

A review is given on the development of passive samplers for aquatic environments. Passive samplers that are simple and easy to use and with minimal consumption of organic solvents to desorb the analytes from the trapping media are focused. New developments in quality assurance procedures are highlighted.

Urban air background concentrations of benzene, toluene, ethylbenzene, and xylenes (BTEX) were measured in 2007 in the Tricity area (Gdansk, Gdynia, and Sopot) and Tczew applying two types of passive samplers: Home-made permeation passive samplers and two diffusive passive samplers Orsa 5 (National Dräger) and Radiello (FS Maugeri). Differences between the time-weighted annual averages concentr...

Diffusion-based passive samplers are increasingly used for water quality monitoring. While the overall method robustness and reproducibility for passive samplers in water are widely reported, there has been a lack of a detailed description of uncertainty sources. In this paper an uncertainty budget for the determination of fully labile Cu in water using a DGT passive sampler is presented. Uncer...

swelling urban populations and increasing number of industry and especially automobiles in and around cities have resulted in adverse effect on human health. one of the most important things regarding air pollution in these days is that the number of motor vehicles has increased, and the resulting problems of new types of air pollution on large scale need to be emphasized in large cities.the gr...