Introduction. The generation of magnetic resonance images with waveguides has been successfully demonstrated at 7 Tesla for whole-body systems. [1]. It has been previously shown published by our group that the waveguide approach can be used at 3T and whole-body systems using a parallel-plate waveguide [2]. The parallel-plate waveguide is probably the simplest waveguide available and its electro...

Metamaterial structures have unique properties in controlling the propagation of electromagnetic waves. In this work, we analyze the effect of artificial magnetic conductor (AMC) surface strips on the bottom face of an oversized parallel plate waveguide to enhance the wave guidance within it. The results using these configurations in a linear slot array antenna fed by a rectangular parallel pla...

Multipactor breakdown analysis is presented in cylindrical dielectric resonator waveguide filter under its dual-mode behavior. The method of effective electron algorithm with combination of Monte-Carlo method is used to perform the simulation and predict multipactor breakdown thresholds. The breakdown thresholds of the proposed structure are presented for different values of frequency-gap produ...

We report efficient quasi-optic coupling of a freely propagating beam of terahertz (THz) pulses into a parallel-plate copper waveguide (with a plate separation of 108mum) and subsequent low-loss, single-TEM-mode propagation with virtually no group-velocity dispersion. Undistorted, low-loss propagation of the incoming 0.3-ps FWHM THz pulses was observed within the bandwidth from 0.1 to 4 THz for...

An approximate formula is proposed for the equivalent susceptance of a circular iris in a parallel plate waveguide when the TEM mode cylindrical wave is incident from the center of the iris. Schwinger’s variational method for a linear iris is generalized to the cylindrical case, and an approximate closed form formula is obtained which recovers the result of the linear iris when the radius of th...

Introduction. Waveguides have been successfully used to generate magnetic resonance images at 7 Tesla for whole-body systems [1]. From these results, it has been established that waveguides are only suitable for 7T systems with wide bores of al least 60 cm. This is mainly due to the cut-off frequency of the cylindrical waveguides used. To overcome this limitation a parallel-plate waveguide was ...

In order for the promise of terahertz (THz) wireless communications to become a reality, many new devices need to be developed, such as those for routing THz waves. We demonstrate a power splitting router based on a parallel-plate waveguide (PPWG) T-junction excited by the TE1 waveguide mode. By integrating a small triangular septum into the waveguide plate, we are able to direct the THz light ...