Palm oil mill effluent (POME) is an important source of inland water pollution when released into local rivers or lakes without treatment. In the process of palm oil milling, POME is generat‐ ed through sterilization of fresh oil palm fruit bunches, clarification of palm oil and effluent from hydro-cyclone operations [Borja et al.,1996a]. POME is a viscous brown liquid with fine suspended solid...

Palm oil mill effluent from the palm oil processing industry has been documented as a cause of severe damages to aquatic systems and a significant increase in greenhouse gases. This study was designed to use electrocoagulation for the pre-treatment of palm oil mill effluent to simultaneously reduce the pollutants and produce hydrogen gas. In this research, response surface methodology was appli...

The rising global demand for palm oil and its associated products has led to increased numbers of palm oil refineries with its attendant effluent discharge. Many researches have confirmed the ecological disruptive potentiality of Palm Oil Mill Effluent (POME), still further attention has to be directed at POME’s potential genotoxicity. The present study has made physico-chemical and genotoxicit...

The rising global demand for palm oil and its associated products has led to increased numbers of palm oil refineries with its attendant effluent discharge. Many researches have confirmed the ecological disruptive potentiality of Palm Oil Mill Effluent (POME), still further attention has to be directed at POME’s potential genotoxicity. The present study has made physico-chemical and genotoxicit...

In this study treatment of palm oil mill effluent was carried out with the intention to produce hydrogen during the anaerobic degradation process. The hydrogen generating microflora was isolated from the cow dung based on pH adjustment (pH 5) coupled with heat treatment (2 h). The microflora was initially tested for its hydrogen generating capability for varying fermentation pH of 4, 5, 6 and 7...

Kaewchai, S. and Prasertsan, P. Screening and application of thermotolerant microorganisms and their flocculant for treatment of palm oil mill effluent Songklanakarin J. Sci. Technol., 2002, 24(3) : 413-420 Among fifteen thermotolerant polymer-producing isolates, three strains SM 29, WD 90, and SM 38 produced polymer posessing very high flocculating activities (24.81, 14.63 and 10.84, respectiv...

Producing crude palm oil (CPO) will have side effect on producing palm oil mill effluent (POME).  Besides of high COD /BOD contents, POME still contains high amount of nutrients (nitrogen, phosphor and mineral). Traditional treatment of palm oil mill effluent using facultative anaerobic method not fully eliminated COD and BOD into allowable limit. The objective of this research was to utilize p...

Palm oil processing operation is invariably accompanied by palm oil mill effluent (POME) considered to be an environmental pollutant. While anaerobic digestion and the present tertiary treatment technologies of POME are able to meet the current regulatory effluent discharge requirement of biological oxygen demand (BOD) 100 mg litre – the current limit set by the Department of Environment (DOE) ...

This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoid...

Electrocoagulation (EC) is an electrochemical technique which has been employed in the treatment of various kinds of wastewater. In this work the potential use of EC for the treatment of palm oil mill effluent (POME) was investigated. In a laboratory scale, POME from a factory site in Chumporn Province (Thailand) was subjected to EC using aluminum as electrodes and sodium chloride as supporting...