Excess power production and other anomalous effects have been observed during the electrolysis of heavy water using palladium and palladium-boron alloys as the cathode materials. This study focused on hydrogen and deuterium loading into palladium and palladium-boron alloys. Improved calorimetry provided for the detection of the exothermic heat of absorption of deuterium into palladium and palla...

There is a wide variety of dental alloys, ranging from nearly pure gold and conventional gold-based alloys to alloys based on silver, palladium, nickel, cobalt, iron, titanium, tin, and other metals (Table 1). The types of dental alloys have increased significantly since 1980s in order to change the market price of gold and palladium. Although gold alloys are the mate‐ rials of choice in this a...

Palladium-copper alloys continue to be of interest for hydrogen membrane applications because of their high catalytic activity for hydrogen dissociation, high hydrogen permeability, robustness, and degradation resistance in the presence of sulfur-containing compounds. This sulfur tolerance makes these alloys attractive for membrane applications where sulfur compounds are likely to be present, s...

Introduction: The process of mixing metals with non metals is called alloying, and the resulting mixture alloy. Alloys are composed of at least two elements, from which one must be metal. They are divided into alloys for fixed partial dentures-FPD (golden, golden-platinum, silver-palladium alloys, alloys for soldering and alloys for metal-ceramic dentures). Purpose: the main purpose is to inves...

In this study, the corrosion resistance of Ag-Au-Cu-Pd system alloys consisting of 5 or 10 mass% indium was evaluated. Levels of element release and tarnish were determined and electrochemical measurements performed. Results were compared with those for commercial silver-palladium-gold alloy. In terms of electrochemical behavior, the transpassive potential of these experimental alloys was 168-2...

OBJECTIVE The purpose of this study was to use x-ray diffraction (XRD) to obtain new information about the oxide layers on four representative oxidized high-palladium alloys. METHODS Cast specimens of two Pd-Cu-Ga alloys and two Pd-Ga alloys, with both polished and etched surfaces and air-abraded surfaces, were subjected to oxidation procedures recommended by the manufacturers. The specimens ...

BACKGROUND Since the EU Nickel Directive came into force, concern has been raised that palladium may increasingly replace nickel in alloys used in jewellery and dentistry, and that it may cause as many allergy problems as nickel. OBJECTIVES (i) To investigate the clinical relevance of contact allergy to palladium resulting from the wearing of palladium-coated earrings, and (ii) to evaluate th...

The permeance of Pd–Cu alloys containing 40, 53, 60, and 80 wt.% Pd has been determined over the 623–1173 K temperature range for H2 partial pressure differences as great as 2.6 MPa. Pure palladium and copper membranes were also evaluated. The Pd–Cu alloys exhibited predictable permeances that reflected the crystalline phase structures as shown in the binary phase diagram. Under conditions of f...

Palladium has long been recognised for its hydrogen sorption and separation capabilities. Alloying with different metals to produce binary alloys has been shown to further improve many of its essential properties significantly. Currently palladium-silver alloys are used commercially for the hydrogen purification process, however, other binary alloys have also been shown to significantly improve...

Selected results of investigations focused on the changes to some mechanical properties palladium and several palladium-based alloys caused by exposure hydrogen have been collected presented. The findings indicate that pure are highly susceptible alteration upon hydrogen. In cases alloying with silver copper, alloys, as compared palladium, appear resist properties. case manganese, interesting o...