As for the optical measurement, the longer the focal length of collimator is, the less the measurement error is. However, the longer the focal length is, the more difficult the optical design is. It's higher application value to design long focal length collimator with wide-view. The paper designs a collimator with 2000mm focal length, 4 degree field of view and its wavelength range is from 480...

In October 2009, a quad, mini-beam collimator was implemented at GM/CA CAT that allowed users to select between a 5, 10, or 20 micron mini-beam or a 300 micron scatter guard for macromolecular crystallography [1]. Initial alignment of each pinhole to the optical axis of each path through the mini-beam collimator is performed under an optical microscope using an alignment jig. Next, the pre-alig...

Super-collimation is the propagation of a light beam without spreading that occurs when the light beam is guided by the dispersion properties of a photonic crystal, rather than by defects in the photonic crystal. Super-collimation has many potential applications, the most straight-forward of which is in the area of integrated optical circuits, where super-collimation can be utilized for optical...

Space Dynamics Laboratory at Utah State University (SDL/IJSU) optimized the focus of an off-axis, cryogenically cooled infrared collimator for cryogenic operating temperatures. Historically, collimator focus was optimized at ambient temperatures where interactive focus adjustment and testing coulà be performed. The focus shift that occurred when the optics were cooled was minimized by collimato...

A 1xN2 wavelength-selective switch is demonstrated using a high fill-factor two-axis analog micromirror array and a monolithic 2D collimator array. A 1x2 (scalable to 1x14) WSS with SO-GHz channel spacing is experimentally demonstrated. 02004 Optical Society of America OCIS rodeo: (06C.1810) Couplers, switches, and multiplexers (OM.4510) Optical communications

Array-type optical devices are important for wavelength-division multiplexing optical communication system to achieve small footprint, mass production, and reliability. For fabricating transmitter module in an array configuration, it is difficult to achieve a passive alignment of isolator, collimating lens, and laser diode. To facilitate array isolator integration, a waveguide collimator is pro...

Interferometric techniques described in this paper permit real-time optical image subtraction of two input photograph transparencies without the necessity of intermediate processing steps (e.g., holograms or contact-print transparencies). These interferometric techniques allow the use of a white-light source as well as an extended light source, small input-collimator optics, and optical compone...

Several groups have reported the development of dual modality Gamma camera/optical imagers, which are useful tools for investigating biological processes in experimental animals. While previously reported dual modality imaging instrumentation usually employed a separated gamma camera and optical imager, we designed a detector using a position sensitive photomultiplier tube (PSPMT) that is capab...

The in-process monitoring and real-time control of the penetration depth during laser welding is evaluated. An optical collimator collects the optical emission for measurement with a fast spectrometer. The sensor data are used to calculate the electron temperature and subsequently to determine the weld quality of overlap welds in AISI 304 stainless steel sheets performed both with CW Nd:YAG and...

Gamma-ray spectrometry is widely applied in several science fields, and particular non-destructive gamma scanning emission tomography of irradiated nuclear fuel. Often, a collimator used the experimental setup, to selectively interrogate region interest For optimization instrument design, as well for planning measurement campaigns, predictive models transmitted gamma-ray intensity through are n...