the current building codes provide limited prescriptive guidance on design for protection of buildings due to progressive collapse. progressive collapse is a situation in which a localized failure in a structure, caused by an abnormal load, such as explosions or other happenings. three procedures, often employed for determination of the structural response during progressive collapse i.e. linea...

progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. both general services administration (gsa) and united states department of d...

the purpose of this study is to determine the effect of vierendeel panel width and vertical truss spacing ratio in an inelastic behavior of the stf system due to earthquake loads. the stf system is applied to a six-storey building that serves as apartments [2]. the stf system is used in the building in the transverse direction (n-s direction), while in the longitudinal direction (w-e direction)...

the nonlinear static procedures (nsps) proposed by design codes do not lead to reliable results especially for tall buildings. they generally provide inconsistent estimates of inelastic seismic demands, especially for the top floors due to their inabilities in considering the higher modes effects. in this paper, a new enhanced pushover procedure is proposed which is based on the envelope of the...

this article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. the electrostatic actuation was induced by applying ac-dc voltage between the microbeam and electrode plate. in contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. in additio...

In the present paper, the focus is on the evaluation of steel dual-system frame buildings using four main types of structural analysis (Linear Static, Linear Dynamic, Nonlinear Static and Nonlinear Dynamic Analyses) with regard to "Seismic Rehabilitation Code for Existing Buildings in Iran" (based on FEMA 273 and 356) where the first two authors of the article tend to follow the previous work (...

bridges, as an essential part of transportation system, play a special role in economy, politic and military all around the world. serviceability of bridges is of high importance especially in emergencies, helping injured people and proportioning transportation after earthquakes. earthquake regulation codes, normally suggest linear methods to conduct the analysis, and nonlinear analysis is bare...

displacement coefficient method (dcm) stipulated in the asce 41-06 standard is becoming the preferred method for seismic rehabilitation of buildings in many high-seismic-hazard countries. applications of the method for non-building constructions such as bridges are beyond the scope of this standard. thus its application to this kind of structure should be approached with care. target displaceme...

response modification factor (r factor) is one of the seismic design parameters to be considered in evaluating the performance of buildings during strong motions. this paper has tried to evaluate the response modification factor of concrete coupled shear wall structures with various length/depth ratios of spandrel beams. the effect of diagonal reinforcement of spandrel beam was also evaluated o...

This article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. The electrostatic actuation was induced by applying AC-DC voltage between the microbeam and electrode plate. In contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. In additio...