Natural gas may be used instead of hydrogen as fuel for the molten carbonate fuel cell (MCFC) by steam reforming the natural gas inside the MCFC, using a nickel catalyst (internal reforming). The severe conditions inside the MCFC, however, require that the catalyst has a very high stability. In order to find suitable types of nickel catalysts and to obtain more knowledge about the deactivation ...

Spent catalysts are principally solid waste which that coming out from nitrogenous fertilizer industry, during the production of ammonia, resulting in the production of large amount of solid waste containing nickel, which is the spent or deactivated catalysts. These catalysts contain from 12-14% nickel based on the production process in fertilizer industry disposal of spent catalyst is a proble...

Mesoporous alumina catalysts that incorporate nickel (Ni-Alumina) with different Ni/Al molar ratios of 1:2, 1:5 and 1:10 were synthesized by a one-step sol–gel method using lauric acid as a template. The prepared Ni-Alumina catalysts showed a relatively high surface area with a narrow pore size distribution after calcination at 700 ◦C; these effects were independent of the Ni/Al molar ratio. Al...

In order to study the sulfidation of a catalyst fixed bed, an in operando single pellet sensor was designed. A catalyst pellet from the fixed bed was electrically contacted and its electrical response was correlated with the catalyst behavior. For the sulfidation tests, a nickel catalyst was used and was sulfidized with H₂S. This catalyst had a very low conductivity in the reduced state. During...

there are no appreciable amounts of nickel resources in iran; therefore, secondary resources of this element are to be more considered in future. spent nickel catalysts that are used in various industrial processes are one of them. for example nickel catalyst that is used in hydrogenation of edible oil have large amounts of nickel and they are generally supported on porous materials like silica...

Hydroxyapatite (HAp) supported Nickel (Ni) catalyst was prepared using wet impregnation method. A series of Ni/HAp catalysts have been prepared by varying the amount of nickel viz., 3, 6 and 12 %. The highest Brunauer-Emmett-Teller (BET) surface area of 92.18 m/g was noticed for a catalyst composition containing 3% nickel loading. The scanning electron microscopy (SEM) studies revealed a smooth...

We report a nickel complex containing a conjugated bis-dithiocarbazate ligand that is an active catalyst for the reduction of protons into hydrogen gas. Light-driven hydrogen generation is observed from a system containing this molecular nickel catalyst coupled with a fluorescein photosensitizer and triethylamine sacrificial donor. The photocatalytic system is stable for over 70 hours, achievin...

The development of a low-cost, high-performance platinum-group-metal-free hydroxide exchange membrane fuel cell is hindered by the lack of a hydrogen oxidation reaction catalyst at the anode. Here we report that a composite catalyst, nickel nanoparticles supported on nitrogen-doped carbon nanotubes, has hydrogen oxidation activity similar to platinum-group metals in alkaline electrolyte. Althou...

Aluminium oxide (Al2O3), commonly known as alumina, is a widespread naturally occurring compound that has a broad range of industrial applications. Besides its use as a pigment or abrasive, alumina also plays a vital role as catalyst support for desulfurization or hydrogenation reactions. In the latter case, the active phase on the catalyst often consists of nickel metal nanoparticles. The inte...

Physical vapor deposited nickel catalyst layers of 10, 50, 100, 200, 350, and 500  were granulated using hydrogen plasma for varying times to determine an effective carbon nanotube (CNT) growth process using microwave plasma enhanced CVD (MPECVD). Nickel was deposited via sputtering or evaporation. The catalyst granule size, density, and resulting CNTs were analyzed. Sputtered nickel of 50  w...