this study is focused on investigating the parameters of laser percussion drilling process of nickel-base super alloy inconel 718 with thickness of 1 mm. fiber laser with the power of 500 watts was used as the laser source. laser pulse frequency, duty cycle, laser power, focal point position, were assumed as the laser drilling process variables. the hole geometry features, i.e. entrance hole di...

The effect of prior air exposure on rupture life of superalloys is reported. Oxygen is identified as a damaging species leading to severe losses in both rupture life and ductility. Similar embrittlement is observed in pure nickel and a mechanism is proposed in terms of reduced grain boundary mobility. Two cobalt base alloys and an oxide dispersion strengthened nickel base alloy do not embrittle...

One of the primary reasons for the development of base metal alloys for dental applications has been the escalating cost of gold throughout the 20th century. In addition to providing lower cost alternatives, these nonprecious alloys were also found to provide better mechanical properties and aesthetics for some oral applications. Additionally, certain base metal alloy systems are preferred beca...

Abstract Inconel738 is a nickel-based super alloy widely used in manufacturing gas turbines, particularly the manufacture of blades that are direct contact with hot gases during their operation. As result, these subjected to high temperatures, significant static and dynamic stresses, erosion and/or corrosion which can be very severe. The use coatings one most effective strategies protect materi...

The influence of precipitation of intermetallics on changes in Young’s modulus of nickel and zirconium base alloys has been discussed in this paper. This study indicates that the change in the modulus due to thermal ageing in these alloys is essentially governed by the change in the modulus of the matrix due to removal of precipitation forming elements. 1.0 Introduction Mechanical properties in...

In this study, turning operation of Monel K500 copper-nickel super-alloy was evaluated. Ceramic cutting tools with two different cutting noses (conventional and wiper) were utilized. At first, the experimental tests were designed by using central composite design method. After implementation of the tests, the statistical models for output data (surface roughness, cutting force, and flank wear) ...

In this study, turning operation of Monel K500 copper-nickel super-alloy was evaluated. Ceramic cutting tools with two different cutting noses (conventional and wiper) were utilized. At first, the experimental tests were designed by using central composite design method. After implementation of the tests, the statistical models for output data (surface roughness, cutting force, and flank wear) ...