The main purpose of this investigation is to study the effect of near miscible CO2 injection in different porous mediums on both lab and field scales. This effect can be traced by the change of two-phase gas-oil relative permeability curves. In this work, the experiments have been performed on three rock types (i.e. sandstone, dolomite, and artificial fractured sandstone) based on an incrementa...

the main purpose of this investigation is to study the effect of near miscible co2 injection in different porous mediums on both lab and field scales. this effect can be traced by the change of two-phase gas-oil relative permeability curves. in this work, the experiments have been performed on three rock types (i.e. sandstone, dolomite, and artificial fractured sandstone) based on an incrementa...

core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating co2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. the core samples were provided from a low permeability mixed wet oil reservoir at 156 °f and 1900 psia. in addition, very few studies of surfactant adsorption on carbonate mine...

Prior to the implementation of CO2 injection EOR projects, the screening evaluation of candidate reservoirs will promote the economic benefits of CO2 injection. Currently, a uniform screening method for CO2 miscible flooding does not exist. Based on more than 112 successfully implemented CO2 miscible flooding reservoirs, which was referred in 2010 Worldwide EOR Survey, and CO2 miscible flooding...

prior to the implementation of co2 injection eor projects, the screening evaluation of candidate reservoirs will promote the economic benefits of co2 injection. currently, a uniform screening method for co2 miscible flooding does not exist. based on more than 112 successfully implemented co2 miscible flooding reservoirs, which was referred in 2010 worldwide eor survey, and co2 miscible flooding...

Miscible and near-miscible flooding are used to improve the performance of carbon-dioxide-enhanced oil recovery in heterogeneous porous media. However, knowledge effects pore structure on CO2/oil flow behavior under these two conditions is insufficient. In this study, we construct pore-scale models for various methods comparatively analyze efficiency The simulation results indicate that compare...

Low-permeability near-critical volatile reservoirs are characterized by light oil, complex fluid phase, and strong reservoir inhomogeneity, etc. Purely injecting CO2 will create a series of problems, such as serious gas channeling, low sweep efficiency, oil recovery. Therefore, in this paper, through combination experiments simulations the process studying problem from simple to complex, we car...

Although CO2 injection is one of the most common methods in enhanced oil recovery, it could alter fluid properties of oil and cause some problems such as asphaltene precipitation. The maximum amount of asphaltene precipitation occurs near the fluid pressure and concentration saturation. According to the description of asphaltene deposition onset, the bubble point pressure has a very special imp...

CO2 injection is an effective technique for improved oil recovery in light oil reservoirs, especially for water flooding abandoned reservoirs. In this study, the lower part of Es1 reservoirs in Pucheng oilfield was introduced as the target reservoir. By studying the minimum miscible pressure in CO2 flooding, the reservoir could achieve miscible flooding. Long core displacement experiments prove...

Miscible gas injection, as an Enhanced Oil Recovery (EOR) method, can improve the recovery factor by swelling the residual oil and phasing out the interfacial tension [1]. However, the sweep efficiency of miscible gas injection is not satisfactory because of conformance problems, such as viscous fingering, channelling and gravity override [2]. Foam can solve the problems associated with gas inj...