In this research work, the effectiveness of stainless steel sheet for the production of motor cycle exhaust muffler burn protector was investigated. Energy Dispersive X-Ray fluorescence method was used to determine the chemical composition of the stainless steel materials and exhaust muffler of the motor cycle. The stainless steel sheet was perforated and folded to frustum shape to achieve aero...

The suction muffler of a reciprocating compressor is used for reducing a noise produced by pressure pulsations. According to the shape, the suction muffler is classified into one-chamber type, two-chamber type, Helmholtz-resonator type, pipe-resonator type, and so on. These mufflers are used according to the characteristics of the frequency of compressor noise. In this study, four pole paramete...

To address the problem of low frequency noise of the internal combustion engine, several existing muffler design methods, such as the theory of the quarter-wavelength tube and the Helmholtz muffler, were examined and compared. This paper proposes a new type of muffler design method, which has the advantages of both the quarter-wavelength tube and the Helmholtz muffler. An example is carried out...

Emission regulations for diesel engines are being strengthened and it is impossible to meet the standards without exhaust after-treatment systems. Lack of the space in many diesel vehicles, however, make it difficult to design and install stand-alone catalytic converters such as DOC, DPF, and SCR in the vehicle exhaust systems. Accordingly, those have been installed inside the muffler to save t...

Engine noise is mainly from exhaust noise. Without adding muffler, at a certain speed, the noise up to 100 decibels. Reduce engine exhaust noise, and to high-temperature exhaust gas can be safely and effectively. Muffler as part of exhaust pipe, should ensure that the exhaust flow, resistance and sufficient strength. This research takes an exhaust silencer as a study object, and a muffler sound...

Gas pulsation in the discharge side of rotary compressor is one of the main sources of noise, so the discharge muffler is widely used to decrease the gas pulsation and noise level. Investigations on pressure pulsation in the muffler can provide not only a method to evaluate the muffler design and modification, but also a base for advanced study of noise in rotary compressor. In this paper the m...

Active control of noise has been an emerging technology for the past two decades. Active noise control (ANC) is an attractive means to achieve large amounts of noise reduction in a small package, particularly at low frequencies, where passive noise control may be impractical. While the concept of ANC has long been established, the technological means for implementing ANC have only recently beco...

In these review paper different types of mufflers and design of exhaust system belonging engine has been studied. The object of this study is decide muffler design which one reduces a large amount of noise level and back pressure of engine. In designing, there is different parameter which has to taken in to the consideration. These parameters affect the muffler efficiency.

This pape,r describes a flow-visualizatio n technique that was employed to qualitatively evaluate the gas flow pattern inside a small, low side, hermetically sealed, re ciprocating refrigeration compressor. The applicable compressor des igns are those in which the suction gas from the evaporator is dumped into the compressor shell, and is then drawn through a muffler into the suction plenum of ...