the narrow operating window between pore pressure and fracture pressure makes drilling difficult in some operations. a feasibility study of managed pressure drilling (mpd) is carried out on iran darquain oil field. the previous wells drilled in this field showed that mud returns were lost during drilling gadvan formation. the present work addresses this problem by means of surface back pressure...

optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. the selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. this paper describes the development of analytical...

The narrow operating window between pore pressure and fracture pressure makes drilling difficult in some operations. A feasibility study of managed pressure drilling (MPD) is carried out on Iran Darquain oil field. The previous wells drilled in this field showed that mud returns were lost during drilling Gadvan formation. The present work addresses this problem by means of surface back pressure...

Optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. The selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. This paper describes the development of analytical...

The feasibility of applying a self-adaptive filter to eliminate noise in the downhole mud pressure phase shift keying (PSK) signals is studied. The self-adaptive filter with carrier wave as the filter input signal and mud pressure PSK signal including noise as the filter expected input signal in structure was adopted to process the mud pressure PSK signals with the broadband signal characterist...

For complex drilling operations with narrow geo-pressure windows, it is not uncommon to have problems with formation fracturing, due to erroneous mud pump management. To assist the driller in managing the circulation, it is possible to limit both the acceleration of the mud pumps whilst changing the flow-rate as well as the actual flow-rate, to avoid generating downhole pressure above the fract...

Received: April 29, 2017 Revised: July 01, 2017 Accepted: August 30, 2017 Abstract: Introduction: Unloading phenomenon happens in the beginning of drilling and is able to change stress state around borehole. This change of stress state causes impact on rock structure and strength, thus affecting the evaluation of wellbore stability. Especially for determining initial mud pressure, unloading is ...

The pore pressures of the S, R, Q and P sands follow the hydrostatic gradient and are in pressure communication across the entire Auger basin, Gulf of Mexico. At the structural crests of these sands the pore pressures exceed the least principle stress; directly above the sand crests, are a series of mud volcanoes. Using 3-D seismic and pressure data we map the distribution of subsurface pressur...

• Oil, gas, and geothermal exploration benefit from drill bit monitoring • Bits are expensive and may be damaged by high temperature or pressure • Bit orientation can be monitored to help guide bore hole • State of the art: mud modulation • Mud used to cool and lubricate drill bit • Collar near bit chokes flow to relay signal • Pressure sensor at surface decodes • Effective but slow, unidirecti...

Kick occurrence is a possible event during a drilling process. It is required to be handled immediately using a well control method to avoid blowout, financial losses and damages to the drilling crew. Several methods including driller, wait and weight, and concurrent are applicable in the drilling industry to control a well during a kick incident. In this study, typical well control methods wer...