the paper introducedeffects of modified pyrolysis tar on flue gas desulfurization. this experiment selected the pyrolysis tar as the raw material, researched the effects on desulfurization performance under different modification solution, concentration, solid liquid ratio of pyrolysis tar and modified solution, calcination temperature and calcination time by 16 group orthogonal experiments. th...

The paper introducedeffects of modified pyrolysis tar on flue gas desulfurization. This experiment selected the pyrolysis tar as the raw material, researched the effects on desulfurization performance under different modification solution, concentration, solid liquid ratio of pyrolysis tar and modified solution, calcination temperature and calcination time by 16 group orth...

Co-pyrolysis of Shenmu coal (SM) and cotton stalk (CS) at different blend ratios were carried out in a tubular furnace. The pyrolysis temperature was up to 600 °C at 5 °C/min and kept for 15 min. The results indicated that there was an interactive effect between SM and CS, which increased the tar yield. Moreover, the content of light components in co-pyrolysis tar from all CS/SM blend ratios wa...

The yields of char, tar, and non-condensible gases from the pyrolysis of Pinus radiata D. Don bark were measured. Pyrolysis of bark, on a small preparative scale using an airacetylene flame, gave 48% char with ash content 3.5% (mainly aluminium, calcium, potassium, and silica), and recovered tar in 7% yield (on oven-dried bark equivalent). The major components of the pyrolysis tar were catechol...

Western Research Institute is developing a new pyrolysis process called ROPE© (Recycle Oil Pyrolysis and Extraction) for recovering products from tar sands that require a minimum of upgrading to produce finished, marketable fuels or that can be used as a diluent to decrease the pour point of bitumen for transportation. The concept consists of two pyrolysis steps: (1) retorting tar sand at a low...

Chars produced from the pyrolysis of different waste materials have been investigated in terms of their use as a catalyst for the catalytic cracking of biomass pyrolysis gases during the two-stage pyrolysis-gasification of biomass. The chars were produced from the pyrolysis of waste tyres, refused derived fuel and biomass in the form of date stones. The results showed that the hydrocarbon tar y...

A biomass waste, rice husk, was inspected by thermoanalytical investigation to evaluate its capability as an adsorbent medium for tar removal. The pyrolysis process has been applied to the rice husk material at different temperatures 600, 800 and 1000 °C with 20 °C/min heating rate, to investigate two topics: (1) influence of temperature on characterization of rice husk char and; (2) adsorption...

In this study, sewage sludge and mycelial waste from antibiotic production were pyrolyzed in a batch scale fixed-bed reactor as examples of two kinds of typical industrial biomass wastes with high nitrogen content. A series of experiments were conducted on the rapid pyrolysis and the slow pyrolysis of these wastes in the temperature range from 500–800 °C to investigate the Fuel-N transformation...

Droplets of toluene and three chlorinated organics, ortho-dichlorobenzene, 1,2-dichloroethane, and trichloroethylene, were pyrolyzed in pure nitrogen. The composition and bacterial mutagenicity of the product tars were measured. The presence of organic chlorine was found to affect both pyrolysis product tar composition and total tar mutagenicity. Pyrolysis in the absence of chlorine produced ta...

The general aim of this study is the valorisation of Automotive Shredder Residue (ASR) via pyrolysis. Tar, the condensable gases obtained in the pyrolysis process, is an interesting alternative fuel. Thus, the pyrolysis process was investigated in order to maximize the tar yield. The design of experiment approach was used to plan a series of experiments and to identify which operating variables...