The objective of this study is to evaluate the rheological properties and chemical bonding of nano-modified asphalt binders blended with nanosilica. In this study, the nanosilica was added to the control asphalt at contents of 4% and 6% based on the weight of asphalt binders. Superpave binder and mixture tests were utilized in this study to estimate the characteristics of the nano-modifed aspha...

Marshall Test design methods are used to design TLA modified asphalt mixture and base asphalt mixture respectively, and their pavement performance is tested. The results showed that there is a transforming coefficient of 1.15 between OAC of 40% TLA modified asphalt mixture and that of base asphalt mixture, and ultimate gradation of the TLA modified asphalt mixture is finer than previous gradati...

This work aims to improve the rutting and fatigue cracking resistance of asphalt binders using selected nanoor micro-sized materials and to shed light on the microstructure changes induced by such modification to asphalt binders. The four modifiers (Nanomer I.44P, carbon microfiber, non-modified nanoclay and polymer modified nanoclay) were added into the control asphalt binder (PG 58-34). The S...

In road paving industry, asphalt emulsion is used for cold mix application such as chip seal, slurry seal, microsurfacing, cold recycled mixture and etc. Asphalt emulsion has several advantages compared to normal asphalt such as eco-friendly, easy to handle at ambient temperature and energy saving material because it does not need any heating process in its application. The history of asphalt e...

Asphalt concrete pavements have a short life cycle, failing mainly due to temperature changes, traffic loading and ageing. Modified asphalt mixtures provide the technology to produce a bituminous binder with improved viscoelastic properties, which remain in balance over a wider temperature range and loading conditions. In this research, 60/70 penetration grade asphalt binder was modified by add...

With the strengthened regulation on the mandatory use of recycled aggregate, development of construction materials using recycled aggregate has recently increased. This study aimed to secure the performance of asphalt concrete mixture by developing recycled-modified asphalt using recycled basalt aggregate from the Jeju area. The strength of the basalt aggregate from the Jeju area used in this s...

rutting in asphalt concrete is a very common form of distress in asphalt concrete pavement which unfortunately has been incurable to date. one of the prime reasons of rutting is attributed to the behaviour of asphalt binder at elevated temperature. this study has investigated the performance of polypropylene fibres modified asphalt concrete mix against rutting. two types of asphalt concrete sam...

Waste utilization has gained more and more interest. In this study, crumb rubber and diatomite were used to modify asphalt binder and the short-term aging effects on the properties of modified asphalts were evaluated. Three kinds of modified asphalt were prepared; they are diatomite modified asphalt (DA), crumb rubber modified asphalt (RA), and diatomite and crumb rubber compound modified aspha...

asphalt modification/reinforcement has received considerable attention as viable solutions to enhance flexible pavement performance. this is mainly prompted by the unsatisfactory performance of traditional road materials exposed to dramatic increases and changes in traffic patterns. this paper presents the evaluation of fatigue behaviour of nano reinforced stone mastic asphalt mixtures. fatigue...

One of the important factors of cracks on the asphalt pavements is bitumen aging that associated with the loss of volatile components and oxidation of asphalt binder. This paper is about effect of Styrene-Butadiene-Styrene (SBS) polymer on asphalt aging In order to decrease asphalt aging effects. For this purpose samples of base bitumen and SBS modified bitumen aged according to the rolling thi...