نتایج جستجو برای: model updating
تعداد نتایج: 2118044 فیلتر نتایج به سال:
this paper presents an overview of model updating and particularly its application for updating of frame model. in this article a mathematical model of the frame was produced with finite element method. the frame was subjected to hammer modal testing. then the results of the modal testing were compared with those predicted with the model. this comparison revealed discrepancies between these two...
0
یکی از مهمترین روشهای تحلیل سازه ها در مهندسی مکانیک استفاده از مدل المان محدود است که اعتبار سنجی مدل مذکور، اهمیت بسزایی دارد. بدین منظور معمولا سازه مورد نظر را بصورت تجربی تحت تست آنالیز مودال قرار می دهند که مسلما فرکانس ها و شکل مود استخراجی با نظایر استخراج شده در مدل المان محدود اختلاف دارد. برای به حد اقل رساندن این اختلاف از روش های موسوم به مدل بروز رسا نی شده ) ( model updatingاستفا...
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference of recorded acceleration of real damaged structure and hypothetical damaged structure, by updating physical parameters in each phase using iterative process of Levenberg-Marquardt algorithm. This algorithm is based on sensitivity analysis and pr...
marine industry requires continued development of new technologies in order to produce oil. an essential requirement in design is to be able to compare experimental data from prototype structures with predicted information from a corresponding analytical finite element model. in this study, structural model updating may be defined as the fit of an existing analytical model in the light of measu...
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید