The exposed crystal facets of the catalysts are crucial to catalytic performances for soot combustion as a typical heterogeneous catalysis reaction. Herein, we have successfully synthesized well-defined ?-Mn2O3 nanocrystals with three morphologies octahedrons (?-Mn2O3-O), truncated octahedral bipyramids (?-Mn2O3-TOB) and hexagonal nanosheets (?-Mn2O3-HN) via adjusting amount glucose in hydrothe...

Two-stage chemical deposition (TSCD) technique is used to produce ZnO, Mn2O3 and NiO films on soda-lime glass (SL-G) from an aqueous solution of zinc, manganese and nickel complex, respectively. The TSCD method enables the deposition of metal oxide thin films with a thickness which can be controlled during the preparation procedure. The ZnO, Mn2O3 and NiO thin films were polycrystalline films w...

Manganese oxides are one of the most important groups of materials in energy storage science. In order to fully leverage their application potential, precise control of their properties such as particle size, surface area and Mn (x) (+) oxidation state is required. Here, Mn3O4 and Mn5O8 nanoparticles as well as mesoporous α-Mn2O3 particles were synthesized by calcination of Mn(II) glycolate nan...

Bicontinuous hierarchically porous Mn2O3 single crystals (BHP-Mn2O3-SCs) with uniform parallelepiped geometry and tunable sizes have been synthesized and used as anode materials for lithium-ion batteries (LIBs). The monodispersed BHP-Mn2O3-SCs exhibit high specific surface area and three dimensional interconnected bimodal mesoporosity throughout the entire crystal. Such hierarchical interpenetr...

Mn2O3 has been selected to realize nanothermite membrane for the first time in the literature. Mn2O3/Al nanothermite has been synthesized by magnetron sputtering a layer of Al film onto three-dimensionally ordered macroporous (3DOM) Mn2O3 skeleton. The energy release is significantly enhanced owing to the unusual 3DOM structure, which ensures Al and Mn2O3 to integrate compactly in nanoscale and...

Cerium–manganese mixed oxides with compositions of Ce0.5Mn0.5O1.75 and Ce0.8Mn0.2O1.9 were prepared by the citric-acid (Pechini) method and their catalytic properties were compared to CeO2 and Mn2O3. The mixed oxides exhibited higher specific rates than either CeO2 or Mn2O3 for oxidation of both methane and nbutane. While XRD measurements of the mixed oxides suggested that the materials had pri...

Core-shell nanostructures of Mn2O3@SiO2, Mn2O3@amino-functionalized silica, Mn2O3@vinyl-functionalized silica, and Mn2O3@allyl-functionalized silica were synthesized using the hydrolysis of the respective organosilane precursor over Mn2O3 nanoparticles dispersed using colloidal solutions of Tergitol and cyclohexane. The synthetic methodology used is an improvement over the commonly used post-gr...

Multi-shelled Mn2O3 hollow microspheres have been achieved through a pH-regulated method and used as supercapacitor electrodes. The designed unique architecture allows efficient use of pseudo-capacitive Mn2O3 nanomaterials for charge storage with facilitated transport for both ions and electrons, rendering them high specific capacitance, good rate capability, and remarkable cycling performance.

The high voltage spinel LiNi0.5Mn1.5O4 is a promising cathode material in next generation of lithium ion batteries. In this study, LiNi0.5Mn1.5O4 with various particle microstructures are prepared by controlling the microstructures of precursors. LiNi0.5Mn1.5O4 spinel samples with solid, hollow and hierarchical microstructures are prepared with solid MnCO3, hollow MnO2 and hierarchical Mn2O3 as...

Highly efficient energy storage is in high demand for next-generation clean energy applications. As a promising energy storage material, the application of Mn2O3 is limited due to its poor electrical conductivity. Here, high-pressure techniques enhanced the electrical conductivity of Mn2O3 significantly. In situ synchrotron micro X-Ray diffraction, Raman spectroscopy and resistivity measurement...