A Laser Induced Fluorescence technique (LIF) has been used to study the mixing behavior of two emerging streams in a T-Type mixing chamber. A mixing index on the basis of digital image light intensities is calculated. It has been shown that averaging over more than 800 images leads to a stable mixing index calculation. Moreover, the effect of equal and un-equal flow rates on the mixing behavior...

In this paper, the effect of cold air on the fluid flow inside the cylindrical combustion chamber and its wall temperature distribution have been studied computationally, taking into account the effect of radiative heat transfer from hot gases. The results have been compared with the case that radiative heat transfer was neglected. It is observed that the reattachment length increases when incr...

We have evaluated the mixing properties of nitric oxide in inspired gases for five different administration techniques. Nitric oxide and carbon dioxide were delivered to the ventilator system before the ventilator or after the ventilator as a continuous flow, either directly into the inspiratory limb or into a mixing chamber positioned in the inspiratory limb. Both gases were delivered as above...

A novel microdevice for passively mixing liquid samples based on surface tension and a geometrical mixing chamber is presented. Due to the laminar flow regime on the microscale, mixing becomes difficult if not impossible. We present a micromixer where a constantly changing time dependent flow pattern inside a two sample liquid plug is created as the plug simply passes through the planar mixer c...

In order to study effect of complementary pulp distribution, computational fluid dynamic (CFD) was used to research flow characteristic of hydraulic headbox based on complementary pulp distribution. Mass flow rate out of mixing chamber and velocity distribution at slice of headbox were experimented. The results showed that because of simplified design, there were a little gradient of velocity a...

The article deals with numerical investigation of axisymmetric subsonic air to air ejector. An analysis of flow and mixing processes in cylindrical mixing chamber are made. Several modes with different velocity and ejection ratio are presented. The mixing processes are described and differences between flow in the initial region of mixing and the main region of mixing are described. The lengths...