microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. in this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and zr content. the results show that after homogenization, variations in thickness have no effect on the hardness. also, after hea...

Investigations were conducted on low-carbon steel and the steel with same chemical composition with addition of microalloying element niobium. While tensile testing was carried out, the thermographic measurement was tacking place simultaneously. A specific behavior of niobium microalloyed steel was noticed. Test results have shown that, in the elastic deformation region, thermoelastic effect oc...

The formation of precipitates, especially along austenite grain boundaries, greatly affects the formation of transverse cracks on the surface of continuous-cast steel. The steel composition and cooling history influences the formation of precipitates, and the higher temperature and corresponding larger grain growth rate under oscillation marks or surface depressions also have an important effec...

Microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. In this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and Zr content. The results show that after homogenization, variations in thickness have no effect on the hardness. Also, after hea...

the aim of the paper presented here is to develop the ti - micralloyed steel in otrer to oprtmize the mechanical properties after direct quenching from hot forging temperature. for this purpose, seven melts containing various amounts of titanium were prepared and cast in metal and sand molds. from the ingots, cast in metal mould, tractor links were produced by hot forging. the produced links we...

This paper presents a study of the quasi-static and dynamic deformation behaviors of conventional and microalloyed medium-carbon steels in a wide temperature range. As strain rate increased, the flow stress increased at room temperature, but occasionally did not at elevated temperatures. The flow stress of the microalloyed steel containing precipitates was less sensitive to strain rate at room ...

Machining through turning was carried out in a lathe to study the chip formation of Multiphase Ferrite (F-B-M) microalloyed steel. Taguchi orthogonal array was employed to perform the machining. Continuous and discontinuous chips were formed for different cutting parameters like speed, feed and depth of cut. Optical and scanning electron microscope was employed to identify the chip morphology. ...

The resistance to hydrogen embrittlement is of essential importance for steels for vessels for storage of hydrocarbons and depends on the effect of absorbed hydrogen on steel ductility. API tests have shown for the 490 MPa yield stress HSLA steels with the microstructure of ferrite and cementite particles a much greater reduction of area than for the 350 MPa steel with the microstructure of pol...