abstractin this work, the micro powder was the product of cedar leaf (mpcl) is used as a low-cost adsorbent for the removal of pb2+ ions from aqueous solutions. bath experiments were used to determine the best adsorption conditions the adsorption percentage of pb2+ ions mpcl samples at different initial ph, contact time (tc), adsorbent dosage and temperature (t) were investigated. effective rem...

For microfabrications of biochips with micro fluidic channels, a large number of microfabrication techniques based on silicon or glass-based Micro-Electro-Mechanical System (MEMS) technologies were proposed in the last decade. In recent years, for low cost and mass production, polymer-based microfabrication techniques by microinjection molding and micro hot embossing have been proposed. These t...

in this study, selenium was recovered from an industrial dust. after the purification process, the researchers were able to prepare selenium micro powder. the objective of this study was to prepare selenium nano particles by water solution phase method from the micro powders. the results showed that selenium micronized powder and nano particles had high purity. the obtained nanoparticles were t...

In this study, the comparative role of nano‐ and micro‐sized Cu powder in exploring the influence on the tribo‐performance of friction materials in the form of brake‐pads is discussed. Two friction composites were developed by keeping allthe ingredients constant and varying the size of the selected filler (copper powder). The developed micro‐composite contained 10 % ...

Micro-electric discharge machining (μ-EDM) is an important manufacturing process that is able to produce components and tools with micro-features. Improvement to this process has resulted in the use of powder mixed dielectric (PMD), which results in better surface quality and faster machining time. However, the presence of conductive powder in the dielectric fluid negatively affects the accurac...

This study investigates the effects of micro- and nano-sized SiC powder on the rheological behavior of Al based feedstocks for powder injection molding (PIM).  Different compositions of Al feedstocks with additions of micro and nano-SiC powder were prepared and their rheological properties were measured with a rotational rheometer. The effects of SiC content and shear rate were investigated and...

A new sintering mechanism is revealed for copper powder being sintered under the influence from electrical field and force-field during forming of micro-components. The analysis of the microstructure and grain boundary evolution on the sintered samples showed that interface disappearance at contact areas between particles is a continuous process which involves new grain formation and grain refi...

B. Ahn*, S. R. Nutt 1. Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA, 90089-0241, USA *[email protected] Abstract: Al–Mg alloy powder was mechanically milled in liquid N2 (cryomilling) to produce thermally stable powder with nanocrystalline (NC) microstructure for the manufacture of highstrength alloys. A multi-scale microstructure w...

Scatter-free phosphors promise to suppress the scattering loss of conventional micro-size powder phosphors in white phosphor-converted light-emitting diodes (pc-LEDs). Large micro-size cube phosphors (~100 μm) are newly designed and prepared as scatter-free phosphors, combining the two scatter-free conditions of particles based on Mie's scattering theory; the grain size or grain boundary was sm...

This study is to develop a micromachining technology for a light guidepanel(LGP) mold, whereby micro dot patterns are formed on a LGP surface by a singleinjection process instead of existing screen printing processes. The micro powder blastingtechnique is applied to form micro dot patterns on the LGP mold surface. The optimalconditions for masking, laminating, exposure, and developing processes...