hot rolling of a large ring of titanium alloy (lrt) is a highly nonlinear incremental forming process with coupled mechanical and thermal behaviors (mtbs) which significantly affect microstructure and properties of the ring. the feed rate of idle roll and the rotational speed of driver roll have major effects on ovality of the ring. in this paper, the effects of these parameters on the ovality ...

Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures w...

production of fe-c alloy powders by mechanical alloying was studied. fe and graphite elemental powdermixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. thestructural changes of powder particles during mechanical alloying were studied by x-ray diffractometery,scanning electron microscopy and microhardness measurements. for both compositions, mecha...

In this paper, 2wt.% Fe doped TiO2 nanopowder was prepared by a combination of sol-gel and mechanical alloying methods. The mechanical alloying of Fe powder with Ti(OH)4 gel produced from the sol-gel method was used to produce Fe doped TiO2 nanopowder. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and diffuse reflectan...

although cu and fe are immiscible under equilibrium conditions, they can form supersaturated solid solutions by mechanical alloying. in this paper, nano-structured of the metastable cu-fe phase containing 10, 15, 20 and 25% wt fe were synthesized by intensive ball milling for 15h, in order to achieve a solid solution of fe in cu. the phase composition, dissolution of the fe atoms into the cu ma...

Brain tissue mechanical properties are of importance to investigate child head injury using finite element (FE) method. However, these properties used in child head FE model normally vary in a large range in published literatures because of the insufficient child cadaver experiments. In this work, a head FE model with detailed anatomical structures is developed from the computed tomography (CT)...

The aim of the study was to examine the deformation modes and also degradation of an adhesively bonded rectangular cross section beam used in the automotive body structure. The study included: (1) performing new experimental investigations on the three-point bend behavior of a rectangular cross section beam made by adhesive bonding method. (2) developing a finite element (FE) model to predict t...