recognition of relationship between the present day stress state and fractures is very important in fractured reservoirs. fractures that are parallel or oblique to maximum horizontal stress have more tendencies to tensile deformation and tensile deformed fractures will be more permeable. the dalan formation is one of the main gas reservoirs of iran witch most of the production from this formati...

This paper uses two-dimensional Finite Element Method (FEM) numerical modeling to analyze the orientation of maximum horizontal tensional stress of the Barapukuria coal basin in Bangladesh. An elastic plane stress model incorporating elastic rock physical properties for the coal basin area was used consisting of 2916 elements with a network of 1540 nodes. The stress field at any point of the mo...

PURPOSE A 3-dimensional finite element model consisting of a bone block and 2 simulated premolar crowns supported by 2 adjacent cylindric implants without immediately surrounding cortical bone was generated and used to investigate the effects of prosthesis materials and prosthesis splinting on the peri-implant bone stress under static loads. MATERIALS AND METHODS The peri-implant maximum equi...

    The combination of horizontal drilling along with hydraulic fracturing has significantly improved the production of hydrocarbon reservoirs and made it possible to extract the relatively impermeable and uneconomical reservoirs. The production rate of oil and gas wells increases proportional to hydraulic fracture aperture or crack opening displacement (COD). This is an important parameter i...

Using the presented criteria for breakdown pressure in which is related to horizontal stress, hydraulic fracturing test directly used estimation of maximum situ stress. However, classical do not take into account effects near-wellbore stress field, so estimating using them accompanied by errors. A plane strain numerical model obtain pressure, effect initial crack length are considered. In this ...

We extend a full-waveform modeling method to invert source focal-plane mechanisms for microseismic data recorded with dual-borehole seismic arrays. Combining inverted focal-plane mechanisms with geomechanics knowledge, we map the pore pressure distribution in the reservoir. Determining focal mechanisms for microseismic events is challenging due to poor geometry coverage. We use the P-wave polar...

Purpose: The aim of the study is to determine stress distribution on preloaded implant-abutment screws in three different implant systems under simulated occlusal loads. Materials and methods: Three abutments to implant internal hex joint systems were simulated by using the 3-dimensional finite element analysis; (1) Nobel Biocare replace tapered (2) Uniti (3) Lifecare self-threaded tapered ceme...

Fluid injection in deep geological formations usually induces microseismicity. In particular, industrial-scale injection of CO2 may induce a large number of microseismic events. Since CO2 is likely to reach the storage formation at a lower temperature than that corresponding to the geothermal gradient, both overpressure and cooling decrease the effective stresses and may induce microseismicity....