the pseudo-elastic behavior of shape memory alloy (sma) truss and cantilever beam are investigated. brinson’s one-dimensional material model, which uses the twinned and detwinned martensite fractions separately as internal variables, is applied in the algorithm to establish the sma stress-strain characteristics. this material model also incorporates different young’s modulus for austenitic and ...

The martensite steels produced by quenching and tempering has been used for machine structural use. Martensite in ferrite-martensite dual-phase steels (hereinafter, DP steels) also has important roll in strengthening of the automobile steel sheets. Therefore the importance of analyzing the microstructure and their mechanical properties of the martensite has been increased year by year. Many res...

Deformation and work hardening behavior of Fe-17Mn-0.02C steel containing ε-martensite within the austenite matrix have been investigated by means of in situ microstructural observations and x-ray diffraction analysis. During deformation, the steel shows the deformation-induced transformation of austenite → ε-martensite → α'-martensite as well as the direct transformation of austenite → α'-mart...

Deformation behavior and microstructure evolution of NiTiCu shape memory alloy (SMA), which possesses martensite phase at room temperature, were investigated based on a uniaxial compression test at the temperatures of 700~1000 ◦C and at the strain rates of 0.0005~0.5 s−1. The constitutive equation of NiTiCu SMA was established in order to describe the flow characteristic of NiTiCu SMA, which is...

The austenite-to-martensite transformation in a partially hardened stainless steel containing 17wt %Cr, 7wt %Ni and 1wt % Al was investigated with Vibrating Sample Magnetometry and Electron Back-Scatter Diffraction. Magnetometry demonstrated that measurable martensite formation can be suppressed on fast cooling to 77K as well as on subsequent fast heating to 373 K. Surprisingly, martensite form...

The austenite-to-martensite transformation in a partially hardened stainless steel containing 17wt %Cr, 7wt %Ni and 1wt % Al was investigated with Vibrating Sample Magnetometry and Electron Back-Scatter Diffraction. Magnetometry demonstrated that measurable martensite formation can be suppressed on fast cooling to 77K as well as on subsequent fast heating to 373 K. Surprisingly, martensite form...

Coarse crystals of martensite can form by the coalescence of thin individual platelets of martensite under appropriate circumstances. Although these coarse grains are essentially single crystals, there exist significant orientation gradients across their dimensions. It is demonstrated that these gradients arise because of the plasticity induced in austenite due to the transformation strain asso...

The influence of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe-17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully austenitic at room temperature; those containing less nitrogen consist of a mixture of austenite, martensite and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are m...

The strength of mixed microstructures of bainite and martensite can peak at an intermediate volume fraction of martensite has been published by recently experimental studies. A quantitative interpretation of these observations is achieved by modelling the mechanical properties of mixed microstructures of bainite and martensite. The peak in the curve of the strength as a function of the volume f...

Modern TRIP assisted steels contain retained austenite with carbon concentrations in excess of 1 wt-%. Some of their mechanical properties, in particular the toughness and ductility, rely on the diffusionless transformation of this austenite into high-carbon martensite, induced by stress and strain. The properties can be excellent in spite of the fact that freshly formed high-carbon martensite ...