نتایج جستجو برای: low velocity impact
تعداد نتایج: 1999830 فیلتر نتایج به سال:
in this paper, dynamic analysis of the composite truncated sandwich conical shells (stcs) with various boundary conditions subjected to low velocity impact was studied analytically, based on higher order sandwich panel theory. impact was assumed to occur normally over to the top face-sheet and the contact force history is predicted using two solution models of the motion are derived based on ha...
experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...
In this paper, a finite element model is presented for the transient analysis of low velocity impact, and the impact induced damage in the composite plate subjected to low velocity impact is studied. The failure criteria suggested by Choi and Chang and the Tsai-Hill failure criteria are used for the prediction of the damage in the composite plate; then the effect of various parameters on the im...
IMPACT TESTS are used to study dynamic deformation and failure modes of materials. Low-velocity impact techniques can be classified as plate-on-plate, rod-on-plate, plate-onrod, or rod-on-rod experiments. Two types of plate-on-plate impact tests have been developed: wave propagation experiments and thin-layer high-strain-rate experiments. The plate-on-plate experiments are further classified as...
In this paper, static indentation and low velocity impact responses of a fully backed composite sandwich plate subjected to a rigid flat-ended cylindrical indenter/impactor are analytically investigated. The analysis is nonlinear due to nonlinear strain-displacement relation. In contrast to the existed analytical models for the indentation of composite sandwich plates, the stacking sequence of ...
In the present paper, the problem of low velocity impact of plates made from different configurations of ceramic, aluminum, steel and composite (S-glass polyester) is analyzed numerically using Abaqus finite element software. The projectile is assumed to be a rigid body with a hemispherical head. Also, for ceramic layers, Holmquist constitutive model, for aluminum and steel layers, Johnson Coo...
In the present paper, a numerical study is performed to investigate the response of different plates aluminum alloys subjected to low velocity impact condition. In this regard, the square AA5083-H116 aluminum plates with dimensions 300×300 and 3 mm and 5 mm thick under low velocity impact are modelled, and a mesh convergence study is carried out to decide the appropriate number of elements. In ...
composite pressure vessel cng made of epoxy – carbon material with nonmetal liner is 60% lighter than aluminum vessel under the same conditions. one of the important parameters in the pressure vessels design is their resistance against impact and prevention of explosion. in this paper, the effects of low velocity impact on composite pressure vessel are investigated using fe analysis. the vessel...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید